Saltar al contenido principal
CSTONE
Lista RFQ

Detalles del producto

FMCN5379 — Super SMA hembra (jack) conector soldadura Attachment 0.031 inch End Launch PCB 0.020 inch pin Diameter Up a 26.5 GHz

Alternativa compatible de origen chino — validamos el ajuste con su plano/especificación.

Número de parte (MPN)

FMCN5379

Frecuencia

DC a 26.5 GHz

cable RF a medida desde plano para sourcing de producción

cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.

Cable RF a medida desde plano →
WhatsApp — Respuesta rápida
Plazo: 3–6 sem. | MOQ: 200+ uds
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
  • • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
  • • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
  • • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.

Imagen

Haga clic para ampliar.

Imagen del producto

FMCN5379 product photo

FMCN5379 product photo

1 / 2

Specifications

Specifications for FMCN5379
Frecuencia (máx.)DC a 26.5 GHz
Signal Performance1.2: 1
Impedancia50 Ω
Terminación0.49 in [12.45 mm]
Operating Temperature-40 a +125 deg C
CategoryCoaxial conectores
Grado IPCoaxial conectores

Descripción

Los datos de referencia para FMCN5379 incluyen actualmente: DC a 26.5 GHz. La frecuencia se indica como DC a 26.5 GHz. El límite real depende del ensamblaje, par de acoplamiento y contexto. Para proyectos de alta frecuencia, incluya el plano, ruta de cable y requisitos críticos en el primer RFQ. Si faltan datos de montaje en el catálogo, confíe en el plano o requisito de acoplamiento. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.

Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.

Conectores similares

También podrían interesarle estos modelos:

LCCA30381-FT3

L-com low loss SMA male to MMCX plug cable assembly using 100 series coax, 3 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30381-FT3 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and MMCX connection on the other. This low loss SMA to MMCX cable from L-com has a male to plug gender combination. Our SMA male to MMCX plug coaxial assembly part number LCCA30381-FT3 can also be known as low loss SMA plug to MMCX male cable assembly when using alternate gender names. SMA plug to MMCX male cable assembly LCCA30381-FT3 is manufactured with a flexible coax. These flexible SMA to MMCX cable assemblies use 100 Series coax (CA-100 flexible) and are double shielded. L-com double shielded low loss SMA male to MMCX plug cable assembly using 100 series coax, 3 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to MMCX M/plug cables is 6 GHz. Technical performance specifications on these 6 GHz SMA male to MMCX plug cables are located on the LCCA30381-FT3 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss MMCX plug to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to MMCX plug cable assembly using 100 series coax, 3 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to MMCX cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to MMCX plug cable assembly using 100 series coax, 3 FT.

Ver detalles →

A30D85-L100-

SMA enchufe a MCX jack bulkhead using JBY100

Ver detalles →

CONSMA001-SMD-G

RF Connectors / Coaxial Connectors SMA Female Surface Mount Gold

Ver detalles →

LCCA30136-FT3

L-com SMA male right angle to SMA female bulkhead cable assembly using LC085TBJ coax, 3 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30136-FT3 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle SMA connection on one end and SMA bulkhead connection on the other. This right angle SMA to SMA cable from L-com has a male to female gender combination. Our SMA male to SMA female coaxial assembly part number LCCA30136-FT3 can also be known as right angle SMA plug to SMA jack cable assembly when using alternate gender names. SMA plug to SMA jack cable assembly LCCA30136-FT3 is manufactured with a formable coax.Maximum frequency for these SMA to SMA M/F cables is 10 GHz. Technical performance specifications on these 10 GHz SMA right angle male to SMA female bulkhead cables are located on the LCCA30136-FT3 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA female bulkhead to right angle SMA male cable assembly because it can be used in the opposite direction.SMA male right angle to SMA female bulkhead cable assembly using LC085TBJ coax, 3 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle SMA to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA male right angle to SMA female bulkhead cable assembly using LC085TBJ coax, 3 FT.

Ver detalles →

132170-12N

RF Adapters - In Series SMA Jack to SMA Jack 50 Ohms Adapter

Ver detalles →

SM7567

RA SMA macho (enchufe) a SMA hembra (jack) adaptador oro chapado latón Body alta Temp 1.25 VSWR

Ver detalles →
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄

Admite coincidencia exacta, por prefijo y parcial.

Aviso legal

Cstone es una fábrica profesional, no una empresa comercial, especializada en conectores RF y coaxiales, adaptadores y conjuntos de cable, incluidos N-type, BNC, SMA, SMP, SSMB y MMCX. Fabricamos conectores según planos 2D o muestras; el ajuste, MOQ, plazo y detalles de producción se confirman por RFQ. Cstone Technology no está afiliada a las marcas originales. Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.