Detalles del producto
SMA PCB montaje pasante en ángulo recto jack Bulkhead 50 Ω IP67
Número de parte (MPN)
Impedancia
50
Frecuencia
3
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Acabado del cuerpo | oro |
|---|---|
| Material del cuerpo | latón |
| Grado IP | Not Applicable |
| Terminación | oro |
| Terminación | latón |
| Terminación | soldadura |
| Mecanismo de acoplamiento | Threaded |
| Número ECCN | EAR99 |
| Frecuencia (máx.) | 3 |
| Género | jack |
| Grado IP | IP67 |
| Impedancia | 50 |
Show 13 more specs
| Material del aislante | PTFE |
|---|---|
| Aislado | no |
| Bajo PIM | no |
| Calificación MIL | Not Mil Qualified |
| No magnético | no |
| Orientación | en ángulo recto |
| Montaje | Bulkhead - Rear montaje |
| Puertos | 1 (Single Port) |
| Categoría de tamaño | Subminiature |
| Temp. máxima (°C) | 165 |
| Temp. mínima (°C) | -65 |
| Estilo de terminación | PCB - montaje pasante |
| Dirección de rosca | estándar |
Descripción
Los datos de referencia para 901-10352 incluyen actualmente: 50 · 3 · Bulkhead - Rear montaje. La impedancia se indica como 50. Si es un parámetro crítico, confírmelo en el RFQ. La frecuencia se indica como 3. El límite real depende del ensamblaje, par de acoplamiento y contexto. El montaje se indica como Bulkhead - Rear montaje. Si importan restricciones de panel, bulkhead o brida, envíe las dimensiones con el RFQ. El material se indica como latón. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. El catálogo también muestra un valor de sellado/protección: IP67. Verifíquelo con el requisito real. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
2001-7941-00
RF conectores / Coaxial conectores SMA enchufe RG-402/U
ADT-2841-FF-SMA-02
adaptadores RF - In serie adaptador F/F SMA 18 GHz
SMA864PNG-0000
SMA jack SQ 12.7 mm 4 hole flange con round contacto (Φ1.27L= 2.4 mm ) PTFE L=8.05 IP67 mated 18 GHz VSWR1.35
R125414004W
RF conectores / Coaxial conectores SMA F SQF
LCCA30685-FT6
L-com N female bulkhead to SMA female cable assembly using RG58 coax, 6 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30685-FT6 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N bulkhead connection on one end and SMA connection on the other. This N to SMA cable from L-com has a female to female gender combination. Our N female to SMA female coaxial assembly part number LCCA30685-FT6 can also be known as N jack to SMA jack cable assembly when using alternate gender names. N jack to SMA jack cable assembly LCCA30685-FT6 is manufactured with a flexible coax. These flexible N to SMA cable assemblies use RG58 coax and are single shielded. L-com single shielded N female bulkhead to SMA female cable assembly using RG58 coax, 6 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to SMA F/F cables is 1 GHz. Technical performance specifications on these 1 GHz N femalebulkhead to SMA female cables are located on the LCCA30685-FT6 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA female to N female bulkhead cable assembly because it can be used in the opposite direction.N female bulkhead to SMA female cable assembly using RG58 coax, 6 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N female bulkhead to SMA female cable assembly using RG58 coax, 6 FT.
LCCA30633-FT3
L-com SMA female bulkhead to TNC male right angle cable assembly using LC085TBJ coax, 3 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30633-FT3 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with SMA bulkhead connection on one end and right angle TNC connection on the other. This SMA to right angle TNC cable from L-com has a female to male gender combination. Our SMA female to TNC male coaxial assembly part number LCCA30633-FT3 can also be known as SMA jack to right angle TNC plug cable assembly when using alternate gender names. SMA jack to TNC plug cable assembly LCCA30633-FT3 is manufactured with a formable coax. These formable SMA to TNC cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded SMA female bulkhead to TNC male right angle cable assembly using LC085TBJ coax, 3 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to TNC F/M cables is 6 GHz. Technical performance specifications on these 6 GHz SMA femalebulkhead to TNC right angle male cables are located on the LCCA30633-FT3 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle TNC male to SMA female bulkhead cable assembly because it can be used in the opposite direction.SMA female bulkhead to TNC male right angle cable assembly using LC085TBJ coax, 3 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to right angle TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA female bulkhead to TNC male right angle cable assembly using LC085TBJ coax, 3 FT.
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Cstone es una fábrica profesional, no una empresa comercial, especializada en conectores RF y coaxiales, adaptadores y conjuntos de cable, incluidos N-type, BNC, SMA, SMP, SSMB y MMCX. Fabricamos conectores según planos 2D o muestras; el ajuste, MOQ, plazo y detalles de producción se confirman por RFQ. Cstone Technology no está afiliada a las marcas originales. Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.