Detalles del producto
RF conectores / Coaxial conectores TNC ST crimpado enchufe RG179-75 Ω-DL
Número de parte (MPN)
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Estilo de terminación | cable - crimpado |
|---|---|
| Acabado del cuerpo | níquel |
| Mecanismo de acoplamiento | Threaded |
| Producto | conectores |
| Categoría de producto | RF conectores / Coaxial conectores |
| Frecuencia mínima | - |
| Peso unitario | 0.411294 oz |
| Frecuencia máxima | 1 GHz |
| Serie RF | TNC |
| Género | enchufe |
| Impedancia | 75 Ω |
| Grado IP | RF conectores / Coaxial conectores |
Show 15 more specs
| Temperatura máxima de operación | + 155 C |
|---|---|
| Terminación | oro |
| Tensión nominal | 500 V |
| Aislamiento | Non-Isolated |
| Material del cuerpo | latón |
| Ciclos de acoplamiento | 500 |
| RoHS | E |
| Subcategoría | interconexiones RF |
| Orientación | recto |
| Grado IP | - |
| Grado IP | RG-179 RG-187 Belden 9221 |
| Embalaje | a granel |
| Temperatura mínima de operación | - 40 C |
| Terminación | crimpado |
| Terminación | latón |
Descripción
Hay un MPN de referencia para 122117; la confirmación final depende del plano, especificación o BOM. Si faltan datos de montaje en el catálogo, confíe en el plano o requisito de acoplamiento. El material se indica como latón. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
FMCA2921
TNC Male to TNC Male Cable RG405 Type .086 Coax
53_TNC-50-0-1/133_NE
adaptadores RF - In serie TNC plug(m) a TNC jack(f) en ángulo recto
LCCA30021-FT1.5
L-com low loss N male to TNC male cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30021-FT1.5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with N connection on one end and TNC connection on the other. This low loss N to TNC cable from L-com has a male to male gender combination. Our N male to TNC male coaxial assembly part number LCCA30021-FT1.5 can also be known as low loss N plug to TNC plug cable assembly when using alternate gender names. N plug to TNC plug cable assembly LCCA30021-FT1.5 is manufactured with a flexible coax. These flexible N to TNC cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss N male to TNC male cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC M/M cables is 18 GHz. Technical performance specifications on these 18 GHz N male to TNC male cables are located on the LCCA30021-FT1.5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss TNC male to N male cable assembly because it can be used in the opposite direction.Low loss N male to TNC male cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss N male to TNC male cable assembly with heavy duty heat shrink boot using LL142 coax, 1.5 FT.
R143088101
TNC / recto enchufe crimpado tipo cable 3.85/50 S
PE3C4750
N Male Right Angle to TNC Male Cable Using LMR-600-DB Coax
LCCA30280-FT10
L-com's LCCA30280-FT10 is a low loss N male to TNC male right angle cable assembly using LMR-240-DB coax, 10 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this N cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-240-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30280-FT10 L-com Low Loss N Male to TNC Male Right Angle Cable Assembly using LMR-240-DB Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Cstone Technology es un socio de abastecimiento de exportación con sede en China para alternativas compatibles y no está afiliada a las marcas originales. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.