Detalles del producto
BNC Straight Crimp Jack RG-179DS RD-179 Bulkhead Rear Mount 75 Ohm
Número de parte (MPN)
Impedancia
75
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Interfaz | RG-179 DB, RG-179 Double Shield, RD-179, AT&T 19224L2 |
|---|---|
| Impedancia | 75 |
| Género | Jack |
| Orientación | Straight |
| Terminación | Crimp |
| Terminación | Cable - Crimp |
| Montaje | Bulkhead - Rear Mount |
| Body Material | Brass |
| Terminación | Phosphor Bronze |
| Body Finish | Nickel |
| Terminación | Gold |
| Mecanismo de acoplamiento | Bayonet |
Show 11 more specs
| Export Control Classification Number | EAR99 |
|---|---|
| Grado IP | Not Rated |
| Insulator Material | Delrin |
| Isolated | No |
| Bajo PIM | No |
| Mil Qualified | Not Mil Qualified |
| Non Magnetic | No |
| Ports | 1 (Single Port) |
| Size Category | Miniature |
| Temp (Max Degrees Celsius) | 85 |
| Temp (Min Degrees Celsius) | -40 |
Descripción
Los datos de referencia para 112648 incluyen actualmente: 75 · Bulkhead - Rear Mount · Straight. El catálogo muestra actualmente la configuración como: Straight · Crimp. La impedancia se indica como 75. Si es un parámetro crítico, confírmelo en el RFQ. El montaje se indica como Bulkhead - Rear Mount. Si importan restricciones de panel, bulkhead o brida, envíe las dimensiones con el RFQ. El material se indica como Brass. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. El catálogo también muestra un valor de sellado/protección: Not Rated. Verifíquelo con el requisito real. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
LCCA30503-FT1.5
L-com BNC female to N male cable assembly using LC141TBJ coax, 1.5 FT is available for same day shipping from our facility. This high quality BNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30503-FT1.5 BNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with BNC connection on one end and N connection on the other. This BNC to N cable from L-com has a female to male gender combination. Our BNC female to N male coaxial assembly part number LCCA30503-FT1.5 can also be known as BNC jack to N plug cable assembly when using alternate gender names. BNC jack to N plug cable assembly LCCA30503-FT1.5 is manufactured with a formable coax.Maximum frequency for these BNC to N F/M cables is 2 GHz. Technical performance specifications on these 2 GHz BNC female to N male cables are located on the LCCA30503-FT1.5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a N male to BNC female cable assembly because it can be used in the opposite direction.BNC female to N male cable assembly using LC141TBJ coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our BNC to N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our BNC female to N male cable assembly using LC141TBJ coax, 1.5 FT.
PE3C9815
BNC Male Right Angle to BNC Male Right Angle Low Loss Cable Using TCOM-240 Coax with Times Microwave Components
R141195020W
RF conectores / Coaxial conectores BNC M RA CR 3.55/50S
112965
RF conectores / Coaxial conectores BNC recto crimpado jack
PE4717
RP-BNC Male Connector Clamp/Solder Attachment for RG59B/U, RG62
LCAD30012
These L-com RF Coaxial Adapters are used to interface between BNC to BNC with coaxial connections. The LCAD30012 is a tee adapter with a male to female configuration. This Coaxial Adapter, BNC Tee Male / Female / Female is made from brass and has a nickel finish. BNC adapters interface design is defined by Mil-STD-348A and has no tool required bayonet mount coupling mechanism with a robust center contact and outer conductor interface. BNC's generally work up to 3 GHz and are a cost effective way of insuring a highly dependable RF Coaxial connection. L-com's RF Coaxial and Triaxial adapters are in stock and ship same day.
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Cstone es una fábrica profesional, no una empresa comercial, especializada en conectores RF y coaxiales, adaptadores y conjuntos de cable, incluidos N-type, BNC, SMA, SMP, SSMB y MMCX. Fabricamos conectores según planos 2D o muestras; el ajuste, MOQ, plazo y detalles de producción se confirman por RFQ. Cstone Technology no está afiliada a las marcas originales. Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.