Product details
TNC connector; configuration: Jack Straight Crimp; impedance 50 Ohms; mounting Bulkhead Mount; cable RG-58
Part number (MPN)
Impedance
50 Ohms
Interface
TNC
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | TNC |
|---|---|
| Interface | Standard |
| Interface | RG-58 |
| Impedance | 50 Ohms |
| Gender | Jack |
| Orientation | Straight |
| Termination | Crimp |
| Mounting | Bulkhead Mount |
| Body Material | Brass |
| Body Finish | Nickel |
| Operating Temperature | -65°C ~ 165°C |
| Signal Performance | 0.20dB |
Description
Current reference data for VT40-2051: TNC · 50 Ohms · Bulkhead Mount. The catalog currently lists the configuration as: Straight · Crimp. Impedance is listed as 50 Ohms. If that parameter is critical, confirm it again in RFQ. Mounting is listed as Bulkhead Mount. If panel, bulkhead, or flange constraints matter, send the dimensions with the RFQ. Material is listed as Brass. That is useful for review, but it does not replace full project stack-up confirmation. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
6001-7051-019
TNC / STRAIGHT JACK FEMALE CLAMP TYPE FOR 2.6/50 D CABLE NICKEL REAR MOUNT|PANEL SEALED
N39T60-142-
N plug right angle to TNC reverse polarity plug using RG142
095-820-196M10L
FAKRA Straight Jack to TNC Right Angle Plug LMR-195 50 Ohm 10 Meter Z Key Code
LCCA30307-FT4
L-com's LCCA30307-FT4 is a low loss N female to TNC male cable assembly using LMR-400 coax, 4 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a female to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N female to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30307-FT4 L-com Low Loss N Female to TNC Male Cable Assembly using LMR-400 Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
R143182020W
RF Connectors / Coaxial Connectors TNC M RA CR 3 .55/50S
000-78800
RF Adapters - Between Series N PLG-TNC JCK
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.