Product details
The 2.40mm series from the RF connector range form part of the wide ranging Radio Frequency interconnect mechanisms, with the 2.40mm connectors being more robust than the traditional SMA.
Part number (MPN)
Impedance
50Ohm
Interface
2.40mm Series
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | 2.40mm Series |
|---|---|
| Interface | RF Connectors |
| Interface | 2.40mm Series |
| Impedance | 50Ohm |
| Mounting | Panel Mount, Through Hole |
| Body Material | Stainless Steel Passivation |
| Termination | Beryllium Copper |
| IP rating | 2.4mm Plug Straight 4 Hole Flange RF Connector |
| Maximum Voltage | 150V |
| Temperature range | -40°C to +85°C |
| Frecuency range | 0GHz - 50GHz |
| VSWR | <1.30 |
Show 14 more specs
| Dielectric withstanding Voltage | >500V |
|---|---|
| Category | RF Connectors |
| Product Features | 2.40mm Series Pin without Extended PTFE 4 Hole Flange |
| range code | RF240A4WOEPTFE Range |
| Part Number | RF240A4PCCDO |
| Lifecycle | New From This Manufacturer |
| Delivery | DHL、UPS、FedEx、Registered Mail |
| Payment | T/T Paypal Visa MoneyGram Western Union |
| More Information | RF240A4PCCDO More Information |
| ECAD | Request Free CAD Models |
| Model Number | RF240A4PCCDO |
| Signal Performance | <1.30 |
| Operating Temperature | -40°C~85°C |
| Electrical Rating | 150 V |
Description
Current reference data for RF240A4PCCDO: 2.40mm Series · 50Ohm · Panel Mount, Through Hole. Impedance is listed as 50Ohm. If that parameter is critical, confirm it again in RFQ. Mounting is listed as Panel Mount, Through Hole. If panel, bulkhead, or flange constraints matter, send the dimensions with the RFQ. Material is listed as Stainless Steel Passivation. That is useful for review, but it does not replace full project stack-up confirmation. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
A60A39-141S-
SMA reverse polarity plug to SMA plug right angle using .141 conformable
CA-085FNMSM018
An attractive alternative to semi-rigid cable, these high quality fully tested N-Male to SMA-Male cable assemblies feature .085 Formable coax. Ideal for laying out and designing pre-bent semi-rigid assemblies. Not exactly what you are looking for? We can custom build your formable cable assemblies using state of the art stripping equipment and with a wide array of available connectors. Contact us today with your custom cable requirement. Also be sure to inquire about lead-free formable cable assemblies.
132109
SMA Panel Mount Jack 2-Hole Flange Solder RG-405 0.086-inch Conformable 50 Ohm
R124175200
SMA / RIGHT ANGLE PLUG CRIMP TYPE CABLE 5/50 S
ADFGP.60A.01.0150D
RF connector; configuration: SMA Male; mounting Chassis Mount
PE39197B
White FAKRA Plug to SMA Male Cable Using RG174 Coax
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.