Product details
SMA Female to GR874 Adapter
Part number (MPN)
Impedance
50 Ohm
Interface
SMA
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Adapters |
|---|---|
| Interface | SMA |
| Interface | GR874 |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Gender | Female |
| Gender | Sexless |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Material 2 | Brass |
| Connector Body Plating 1 | Nickel |
| Connector Body Plating 2 | Nickel |
Show 5 more specs
| Connector Polarity 1 | Standard |
|---|---|
| Connector Polarity 2 | Standard |
| Mounting | None |
| Mounting | None |
| Category | Adapters |
Description
Current reference data for PE9260: SMA · 50 Ohm. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. If mounting is missing here, confirm it from the drawing or mating requirement. Material is listed as Brass. That is useful for review, but it does not replace full project stack-up confirmation. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
ST-SMA-516-BO8A
5/16 inch Hex Fixed Torque Wrench for 3.5mm, 2.92mm, 2.4mm, SMA Connector, Break-Over Type that is Pre-set to 8 in-lbs
LCCA30230-FT2
L-com's LCCA30230-FT2 is a low loss N male to SMA male cable assembly using LMR-195-FR coax, 2 FT with Times Microwave components and ships same-day. The LMR-195-FR coax of this N cable uses the PE dielectric with a VoP of 76%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to SMA cable assembly has a male to male gender configuration with flexible LMR-195-FR series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30230-FT2 L-com Low Loss N Male to SMA Male Cable Assembly using LMR-195-FR Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
415-0028-006
RF Cable Assemblies SMA TO BNC PLGS 6"
R191569000
RF Adapters - Between Series SMA F-BMR SPRING F
PE3W16717
SSMA Male Right Angle to SSMA Male Right Angle Low Loss Cable Using PE-C100-LSZH Coax
SMA6100-0214
SMA reverse polarity plug for RG214; 6GHz VSWR1.25
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.