Product details
RF Adapter, 45 Degree Angle TNC jack to TNC jack 18GHz VSWR1.2
Part number (MPN)
Impedance
50 Ohm
Frequency
DC
Interface
TNC
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Adapters |
|---|---|
| Interface | TNC |
| Interface | TNC |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Frequency (max) | DC |
| Frequency (max) | 18 GHz |
| Gender | Female |
| Gender | Female |
| Adapter Body Style | 45 Degree |
| Connector Body Material 1 | Passivated Stainless Steel |
| Connector Body Material 2 | Passivated Stainless Steel |
Show 3 more specs
| Connector Polarity 1 | Standard |
|---|---|
| Connector Polarity 2 | Standard |
| Category | Adapters |
Description
Current reference data for PE91601: TNC · 50 Ohm · DC. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. Frequency is listed as DC. The real operating limit still depends on the assembly, mating pair, and application context. If mounting is missing here, confirm it from the drawing or mating requirement. Material is listed as Passivated Stainless Steel. That is useful for review, but it does not replace full project stack-up confirmation. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
NP915GIWRATM18I
RF connector; configuration: TNC Male; frequency 890MHz ~ 960MHz; mounting Adhesive
ADT-2837-TF-SMF-02
RF Adapters - In Series ADAPTER F/F TNC 18 GHZ
LCCA30216-FT1.5
L-com's LCCA30216-FT1.5 is a low loss TNC male to TNC male cable assembly using LMR-600 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-600 coax of this TNC cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com TNC to TNC cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this TNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this TNC male to TNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30216-FT1.5 L-com Low Loss TNC Male to TNC Male Cable Assembly using LMR-600 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
N30T39-58-
N plug to TNC plug right angle using RG58
T30T39-316D-
TNC plug to TNC plug right angle using RD316
PE3W11434LF-HS
Water Blue FAKRA Jack to TNC Female Bulkhead Low Loss Cable Using LMR-100 Coax with HeatShrink, LF Solder
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.