Product details
N Male to 7/16 DIN Female Adapter
Part number (MPN)
Impedance
50 Ohm
Frequency
DC
Interface
N
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Adapters |
|---|---|
| Interface | N |
| Interface | 7/16 DIN |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Frequency (max) | DC |
| Frequency (max) | 6 GHz |
| Gender | Male |
| Gender | Female |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Plating 1 | Nickel |
Show 5 more specs
| Connector Polarity 1 | Standard |
|---|---|
| Connector Polarity 2 | Standard |
| Mounting | None |
| Mounting | None |
| Category | Adapters |
Description
Current reference data for PE91134: N · 50 Ohm · DC. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. Frequency is listed as DC. The real operating limit still depends on the assembly, mating pair, and application context. If mounting is missing here, confirm it from the drawing or mating requirement. Material is listed as Brass. That is useful for review, but it does not replace full project stack-up confirmation. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
L777SDE09P1ACO3R
D-Sub Standard Connectors Dsub, Stamped Signal 3A, Right Angle PCB Thru Hole, FP=10.40mm (.409in), Row Pitch 2.54mm, 09 Pin, 0.38 m (15 in) Gold, Bright Tin Shell+Grounding Dimples, M3 Rear Insert, Ground Tab with Clear Hole Without Boardlock
C091-31C014-200-2
Circular DIN Connectors MALE RECEPTACLE 14 WAY
T3424-951
Circular DIN Connectors MALE CABLE CONNECTOR 6 WAY
LCCA30213-FT1.5
L-com's LCCA30213-FT1.5 is a low loss N male to N male right angle cable assembly using LMR-600 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-600 coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-600 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30213-FT1.5 L-com Low Loss N Male to N Male Right Angle Cable Assembly using LMR-600 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
M55116/14-3
DIN Connectors M55116/14-3
PE45424
7/16 DIN Male Connector Solder Attachment for SPP-250-LLPL, Low PIM
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.