Product details
Precision SMA Female to SMP Male 4 Hole Flange Mount Adapter, Full Detent
Part number (MPN)
Impedance
50 Ohm
Frequency
DC
Interface
SMA
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Adapters |
|---|---|
| Interface | SMA |
| Interface | SMP |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Frequency (max) | DC |
| Frequency (max) | 26.5 GHz |
| Gender | Female |
| Gender | Male |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Passivated Stainless Steel |
| Connector Body Material 2 | Passivated Stainless Steel |
Show 5 more specs
| Connector Polarity 1 | Standard |
|---|---|
| Connector Polarity 2 | Standard |
| Mounting | None |
| Mounting | 4 Hole Flange |
| Category | Adapters |
Description
Current reference data for PE91059: SMA · 50 Ohm · DC. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. Frequency is listed as DC. The real operating limit still depends on the assembly, mating pair, and application context. Mounting is listed as 4 Hole Flange. If panel, bulkhead, or flange constraints matter, send the dimensions with the RFQ. Material is listed as Passivated Stainless Steel. That is useful for review, but it does not replace full project stack-up confirmation. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
SMA8500B-0000
SMA jack PCB mount end launch (T=0.65) with round contact (0.95) 14GHz VSWR1.2
LCCA30296-FT5
L-com's LCCA30296-FT5 is a low loss 4.3-10 male to SMA male cable assembly using LMR-400 coax, 5 FT with Times Microwave components and ships same-day. The LMR-400 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to SMA cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30296-FT5 L-com Low Loss 4.3-10 Male to SMA Male Cable Assembly using LMR-400 Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
142-0408-106
RF Connectors / Coaxial Connectors SMA Plug R/A RG142
A30A30-52A-26.5G
26.5GHz RL-19dB test cable: SMA plug to SMA plug using 5002A
EGG.1T.316.CLL
T - Small Outdoor keyed Series connector; protection IP68
FGG.0T.304.CYCC30
T - Small Outdoor keyed Series connector; configuration: Crimp
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.