Product details
Commercial Grade BNC Tee Adapter Female-Female-Female
Part number (MPN)
Impedance
50 Ohm
Interface
BNC
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Adapters |
|---|---|
| Interface | BNC |
| Interface | BNC |
| Interface | BNC |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Gender | Female |
| Gender | Female |
| Gender | Female |
| Adapter Body Style | Tee |
| Connector Body Material 1 | Brass |
Show 12 more specs
| Connector Body Material 2 | Brass |
|---|---|
| Connector Body Material 3 | Brass |
| Connector Body Plating 1 | Nickel |
| Connector Body Plating 2 | Nickel |
| Connector Body Plating 3 | Nickel |
| Connector Polarity 1 | Standard |
| Connector Polarity 2 | Standard |
| Connector Polarity 3 | Standard |
| Mounting | None |
| Mounting | None |
| Mounting | None |
| Category | Adapters |
Description
Current reference data for PE910095: BNC · 50 Ohm. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. If mounting is missing here, confirm it from the drawing or mating requirement. Material is listed as Brass. That is useful for review, but it does not replace full project stack-up confirmation. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
4160
RF Connectors / Coaxial Connectors 50 OHM BNC RECPT.
LCCA30243-FT10
L-com's LCCA30243-FT10 is a low loss BNC male to TNC male cable assembly using LMR-200 coax, 10 FT with Times Microwave components and ships same-day. The LMR-200 coax of this BNC cable uses the PE (F) dielectric with a VoP of 83%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com BNC to TNC cable assembly has a male to male gender configuration with flexible LMR-200 series coax and operates to 4 GHz. The double shield of this BNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this BNC male to BNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30243-FT10 L-com Low Loss BNC Male to TNC Male Cable Assembly using LMR-200 Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
095-850-259-036
BNC Straight Plug to BNC Right Angle Plug RG-174 50 Ohm 36 Inches
B39T85-L100-
BNC plug right angle to TNC jack bulkhead using JBY100
Telegartner: BNC Bulkhead Jack G04
Telegartner: BNC Bulkhead Jack G04, 75 Ohm, pressure sleeve IP 54, A04, Z04, G04 (RG-179 B/U) (packed per 1)
B60T90-85T-
BNC reverse polarity plug to TNC reverse polarity jack using .085 semi-rigid
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology is a China-based export sourcing partner for compatible alternatives and is not affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.