Product details
50 Watt RF Load Up to 18 GHz With SMA Female Input Square Body Black Anodized Aluminum Heatsink
Part number (MPN)
Impedance
50 Ohm
Frequency
DC
Interface
SMA
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Terminations |
|---|---|
| Interface | RF Load |
| Interface | SMA |
| Impedance | 50 Ohm |
| Frequency (max) | DC |
| Frequency (max) | 18 GHz |
| Gender | Female |
| Maximum VSWR | 1.45:1 |
| Maximum Power | 50 Watt |
| Category | Terminations |
Description
Current reference data for PE6040: SMA · 50 Ohm · DC. The catalog currently lists the configuration as: RF Load. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. Frequency is listed as DC. The real operating limit still depends on the assembly, mating pair, and application context. If mounting is missing here, confirm it from the drawing or mating requirement. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
SF0930-6200-4.5
Attenuators - Interconnects SMA M to F Atte 18Hhz 4.5db
PE3C5280
N Male Right Angle to SMA Female Bulkhead Low Loss Cable Using PE-P160LL Coax
9230-9553-019
SMA / STRAIGHT JACK FEMALE CLAMP TYPE FOR 2.6/50 D CABLE PASSIVATED CAPTIVE CONTACT
LCCA30237-FT3
L-com's LCCA30237-FT3 is a low loss SMA male to BNC male cable assembly using LMR-200 coax, 3 FT with Times Microwave components and ships same-day. The LMR-200 coax of this SMA cable uses the PE (F) dielectric with a VoP of 83%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to BNC cable assembly has a male to male gender configuration with flexible LMR-200 series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30237-FT3 L-com Low Loss SMA Male to BNC Male Cable Assembly using LMR-200 Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
PE4188
SMA Female Bulkhead Connector Solder Attachment For RG316, RG174, RG188, .235 inch D Hole
PE44001
SMA Female Field Replaceable Connector With EMI Gasket 4 Hole Flange 0.015 inch Pin, .375 inch Flange Size
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.