Product details
75 Ohm BNC Female Connector Clamp/Solder Attachment for RG179, RG187
Part number (MPN)
Impedance
75 Ohm
Interface
BNC
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | RG179 |
|---|---|
| Interface | RG187 |
| Interface | Connectors |
| Interface | BNC |
| Impedance | 75 Ohm |
| Gender | Female |
| Orientation | Straight |
| Body Style | Straight |
| Polarity | Standard |
| Attachment Method | Clamp/Solder |
| Mounting | None |
| Category | Connectors |
Description
Current reference data for PE4615: BNC · 75 Ohm · Straight. The catalog currently lists the configuration as: Straight. Impedance is listed as 75 Ohm. If that parameter is critical, confirm it again in RFQ. If mounting is missing here, confirm it from the drawing or mating requirement. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
Telegartner: BNC Straight Jack G01/G05
Telegartner: BNC Straight Jack G01/G05, 50 Ohm, MIL-clamp, A10, G01 (RG-58C/U), G05 (RG-223/U), RG-141 A/U, RG-142 B/U, 1.0/2.95 AF, UG-89 B/U (packed per 1)
B90T90-174-
BNC reverse polarity jack to TNC reverse polarity jack using RG174
BA840
This 50 Ohm BNC 3 port F shape adapter allows routing of a signal from a common source to two different devices. The combination of two BNC jack interfaces and one BNC plug interface is useful for mating in many commonly found test applications.
095-850-188M400
RF Cable Assemblies BNC ST PLUG-BNC PLG Belden 4794R 1M
LCCA30299-FT2
L-com's LCCA30299-FT2 is a low loss BNC male to N male cable assembly using LMR-400 coax, 2 FT with Times Microwave components and ships same-day. The LMR-400 coax of this BNC cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com BNC to N cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this BNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this BNC male to BNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30299-FT2 L-com Low Loss BNC Male to N Male Cable Assembly using LMR-400 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
112760-10
BNC Right Angle PCB Jack Through Hole Bulkhead Rear Mount 50 Ohm
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.