Product details
7/16 DIN Male Connector Crimp/Solder Attachment for PE-C195, PE-P195, RG58, RG141, RG303, LMR-195, 0.195 inch
Part number (MPN)
Impedance
50 Ohm
Frequency
DC
Interface
7/16 DIN
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | PE-C195 |
|---|---|
| Interface | PE-P195 |
| Interface | RG58 |
| Interface | RG141 |
| Interface | RG303 |
| Interface | LMR-195 |
| Interface | .195 inch |
| Interface | Connectors |
| Interface | 7/16 DIN |
| Impedance | 50 Ohm |
| Frequency (max) | DC |
| Frequency (max) | 3 GHz |
Show 6 more specs
| Gender | Male |
|---|---|
| Body Style | Straight |
| Polarity | Standard |
| Attachment Method | Crimp/Solder |
| Mounting | None |
| Category | Connectors |
Description
Current reference data for PE44536: 7/16 DIN · 50 Ohm · DC. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. Frequency is listed as DC. The real operating limit still depends on the assembly, mating pair, and application context. If mounting is missing here, confirm it from the drawing or mating requirement. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
PE3C2908LF
7/16 DIN Male to 7/16 DIN Male Low Loss Cable Using LMR-600 Coax With Times Microwave Components , LF Solder
557B071B132ST
D-Sub Backshells SOLID BANDING BKSHLL 45DEG SLOT QWIK TY
LCCA30209-FT4
L-com's LCCA30209-FT4 is a 75 Ohm low loss N male to N male cable assembly using LMR-400-75 coax, 4 FT with Times Microwave components and ships same-day. The LMR-400-75 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with 75 Ohm flexible LMR-400-75 series coax and operates to 2.5 GHz. The double shield of this N cable is layered by tinned copper over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30209-FT4 L-com 75 Ohm Low Loss N Male to N Male Cable Assembly using LMR-400-75 Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
C091-31K014-101-2
Circular DIN Connectors MALE CABLE CONNECTOR 14 WAY RIGHT ANGLE
550T039NF2R4K0-05
D-Sub Backshells BANDING SPLIT BS TOP REAR MOUNT
L717HDHTEH15POL2RM8C309
D-Sub High Density Connectors Dsub, Stamped Signal 3A, Straight PCB Thru Hole, 15 Pin, Bright Tin Shell+Grounding Dimples, 0.76 m (30 in) Gold, 4-40 Removable Front Screwlock, 4-40 Threaded Standoff&Boardlock
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology is a China-based export sourcing partner for compatible alternatives and is not affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.