Product details
SMA Female Connector Solder Attachment 4 Hole Flange Mount Pin Terminal, .340 inch Hole Spacing
Part number (MPN)
Impedance
50 Ohm
Frequency
DC
Interface
SMA
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Pin |
|---|---|
| Interface | Connectors |
| Interface | SMA |
| Impedance | 50 Ohm |
| Frequency (max) | DC |
| Frequency (max) | 18 GHz |
| Gender | Female |
| Orientation | Straight |
| Body Style | Straight |
| Polarity | Standard |
| Attachment Method | Solder |
| Mounting | 4 Hole Flange |
Show 1 more specs
| Category | Connectors |
|---|
Description
Current reference data for PE4217: SMA · 50 Ohm · DC. The catalog currently lists the configuration as: Straight. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. Frequency is listed as DC. The real operating limit still depends on the assembly, mating pair, and application context. Mounting is listed as 4 Hole Flange. If panel, bulkhead, or flange constraints matter, send the dimensions with the RFQ. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
FMCA10067
RA BNC Male to SMA Male Cable RG-316 Coax
11_SMA-50-2-76/199_NE
RF Connectors / Coaxial Connectors SMA straight cable plug(m)
A39N39-5007-18G
18GHz RL-16.5dB test cable: SMA plug right angle to N plug right angle using 5007
LCCA30310-FT3
L-com's LCCA30310-FT3 is a low loss N male right angle to SMA male cable assembly using LMR-400-DB coax, 3 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to SMA cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30310-FT3 L-com Low Loss N Male Right Angle to SMA Male Cable Assembly using LMR-400-DB Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
CSI-RSFB-200-UFFR
RF Cable Assemblies RP-SMA female bulkhead (CONREVSMA005B-1.13) to right angle U.FL female (CONUFL012-1.13) with 200mm of 1.13mm cable
AD-A3B3
SMA plug to BNC plug 8GHz VSWR1.2
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.