Product details
7/16 DIN Male Right Angle to 7/16 DIN Male Right Angle Low Loss Cable Using LMR-600-UF Coax
Part number (MPN)
Impedance
50 Ohm
Interface
7/16 DIN
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Cable Assemblies |
|---|---|
| Interface | LMR-600-UF |
| Interface | 7/16 DIN |
| Interface | 7/16 DIN |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Gender | Male |
| Gender | Male |
| Orientation | Right Angle |
| Orientation | Right Angle |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Cable type | LMR-600-UF |
| Category | Cable Assemblies |
Description
Current reference data for PE3W15040: 7/16 DIN · 50 Ohm · Right Angle. The catalog currently lists the configuration as: Right Angle. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. If mounting is missing here, confirm it from the drawing or mating requirement. Material is listed as Brass. That is useful for review, but it does not replace full project stack-up confirmation. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
LCCA30155-FT2
L-com's LCCA30155-FT2 is a low loss N male right angle to N male right angle cable assembly using LMR-195 coax, 2 FT with Times Microwave components and ships same-day. The LMR-195 coax of this N cable uses the PE (F) dielectric with a VoP of 80%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-195 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-195 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30155-FT2 L-com Low Loss N Male Right Angle to N Male Right Angle Cable Assembly using LMR-195 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
FMCA1774
Low PIM 4.1/9.5 Mini DIN Female to QMA Male Plenum Cable SPP-250-LLPL Coax with LF Solder
FMC1523240
7/16 DIN Male to RA QMA Male Cable LMR-240 Coax
TC-250-716M-LP
7/16 DIN Male Low PIM Connector Solder Attachment for SPP-250-LLPL, SPO-250, SPF-250
PE3216LF
7/16 DIN Male to N Male Cable Using RG142 Coax , LF Solder
T 3379 518
Circular DIN Connectors MALE STRAIGHT CONN
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology is a China-based export sourcing partner for compatible alternatives and is not affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.