Product details
7/16 DIN Male to HN Male Right Angle Cable Using RG214 Coax
Part number (MPN)
Impedance
50 Ohm
Interface
7/16 DIN
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Cable Assemblies |
|---|---|
| Interface | RG214 |
| Interface | 7/16 DIN |
| Interface | HN |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Gender | Male |
| Gender | Male |
| Orientation | Straight |
| Orientation | Right Angle |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Nickel |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Cable type | RG214/U |
| Category | Cable Assemblies |
Description
Current reference data for PE3W08170: 7/16 DIN · 50 Ohm · Straight. The catalog currently lists the configuration as: Straight. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. If mounting is missing here, confirm it from the drawing or mating requirement. Material is listed as Brass. That is useful for review, but it does not replace full project stack-up confirmation. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
LCCA30192-FT4
L-com's LCCA30192-FT4 is a low loss N male right angle to N male cable assembly using LMR-400 coax, 4 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30192-FT4 L-com Low Loss N Male Right Angle to N Male Cable Assembly using LMR-400 Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
15GM8M
DIN Connectors 8 PIN MALE PLUG
T3260-048
Circular DIN Connectors MALE CABLE CONNECTOR 3 WAY
1212080230
Circular DIN Connectors S22200TC422RSN
L717SDB25P1ACO4R
D-Sub Standard Connectors Dsub, Stamped Signal 3A, Right Angle PCB Thru Hole, FP=10.40mm (.409in), Row Pitch 2.54mm, 25 Pin, Flash Gold, Bright Tin Shell+Grounding Dimples, 4-40 Rear Insert, Ground Tab with Clear Hole Without Boardlock
SD3090
Inner DC Block From 380 MHz to 2.7 GHz With 7/16 DIN Connectors
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology is a China-based export sourcing partner for compatible alternatives and is not affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.