Product details
7/16 DIN Male Right Angle to 7/16 DIN Male Low Loss Cable Using PE-C400 Coax
Part number (MPN)
Impedance
50
Interface
7/16 DIN
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Cable Assemblies |
|---|---|
| Interface | PE-C400 |
| Interface | 7/16 DIN |
| Interface | 7/16 DIN |
| Impedance | 50 |
| Impedance | 50 |
| Impedance | 50 |
| Gender | Male |
| Gender | Male |
| Orientation | Straight |
| Orientation | Right Angle |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Mounting | None |
|---|---|
| Connector Polarity 2 | Standard |
| Mounting | None |
| Cable type | PE-C400 |
| Category | Cable Assemblies |
Description
Current reference data for PE37958: 7/16 DIN · 50 · Straight. The catalog currently lists the configuration as: Straight. Impedance is listed as 50. If that parameter is critical, confirm it again in RFQ. If mounting is missing here, confirm it from the drawing or mating requirement. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
L717HDD78PD1CO3F
D-Sub High Density Connectors Dsub, Stamped Signal 3A, High Density, Right Angle PCB Thru Hole, FP=8.89mm (.350"), 78 Pin, Bright Tin Shell+Grounding Dimples, Flash Gold, M3 Removable Front Screwlock, Ground Tab with 3.1mm Clear Hole, Without Boardlock
80395784
The phase invariant MINIBEND CTR line of cable assemblies maintains the bend-to-the-end solderless connector termination technology and introduces industry-leading phase versus temperature performance with an absolute phase change of <300 ppm over a temperature range of -50°C to +125°C.
550T039M1R4B0-03
D-Sub Backshells BANDING SPLIT BS TOP REAR MOUNT
ADF-1600
L-com's 50 Ohm 7/16 DIN Female Connectors are ideal for low-loss, high-power wireless applications. Featuring silver plated brass bodies, these rugged connectors are available for use with 400 series and 600 series low loss coax cable. Order some today!
MD-50SGK
DIN Connectors mini-DIN, 5P jack, rt, through hole, full shield
CA4NMLPNM020
The CA4NMLPNM series are high performance low loss 400-series cable assemblies that feature a N-Male connector to an in-line N-Male gas discharge tube lightning protector attached directly to the cable. This not only reduces the cost since a connector is eliminated, but helps reduce return loss and insertion loss. These cable assemblies feature L-com's CA-400 which is a UV resistant polyethylene jacketed high performance flexible low loss coaxial cable. Attached directly to the cable is L-com's AL6-NM-14-9 5.8 GHz coaxial lightning protector. With a replaceable gas tube element, multi-strike capability and fast response time, they are suitable for a wide range of applications. A ground lug and terminal is provided directly on the lightning protector housing, which provides superior grounding. Custom lengths and connectors are also available. Contact L-com sales for more information. For additional information and complete specification, please see the data sheet in the Downloads section. Note: The lightning protector can also be purchased separately, see AL6-NM-14-9.
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.