Product details
Havok connector; impedance 50 Ohms; frequency 698 MHz to 2690 MHz; mounting PCB Mount
Part number (MPN)
Impedance
50 Ohms
Frequency
698 MHz to 2690 MHz
Interface
Havok
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Specifications
| Interface | Havok |
|---|---|
| Impedance | 50 Ohms |
| Frequency (max) | 698 MHz to 2690 MHz |
| Frequency (max) | 698 MHz |
| Frequency (max) | 2.69 GHz |
| Mounting | PCB Mount |
| Compliance | Y |
| Application | CDMA, DCS, EDGE, GPRS, GSM, HSDPA, PCS, UMTS, WCDMA |
Description
Current reference data for PCS.06.A: Havok · 50 Ohms · 698 MHz to 2690 MHz. Impedance is listed as 50 Ohms. If that parameter is critical, confirm it again in RFQ. Frequency is listed as 698 MHz to 2690 MHz. The real operating limit still depends on the assembly, mating pair, and application context. For higher-frequency projects, include the drawing, cable path, and critical requirements in the first RFQ. Mounting is listed as PCB Mount. If panel, bulkhead, or flange constraints matter, send the dimensions with the RFQ. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
FMCN5343
SMA Male Non-Magnetic Connector Solder Attachment for 0.141 Semi-Rigid, FM-141FL-NM, FM-SR141-NM Cable
4584-2242-02
RF Adapters - Between Series ADAPTR BMA JK/SMA JK
L77DE09SAJ4
D-Sub Standard Connectors D-SUB
FLA.0S.250.CTAC44
S - Indoor Stepped Insert Series connector
MDM-37PL87K
D-Sub Standard Connectors
LCCA30297-FT6
L-com's LCCA30297-FT6 is a low loss 7/16 DIN male to SMA male cable assembly using LMR-400 coax, 6 FT with Times Microwave components and ships same-day. The LMR-400 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to SMA cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 3 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30297-FT6 L-com Low Loss 7/16 DIN Male to SMA Male Cable Assembly using LMR-400 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.