Product details
L-com’s LCAD9793 50 ohm SMA male to 75 ohm type F female adapter is part of our full line of RF components available for same-day shipping. The SMA connector mates mechanically with commercially available 3.5mm and 2.92mm (K) connectors. Our SMA to type F adapter has a male to female gender configuration. LCAD9793 SMA male to type F female adapter operates to 2 GHz. RF adapters are often used to enable connections between two connector types that would otherwise not mate. Certain adapter configurations can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. An RF, microwave or millimeter wave adapter is connected to the equipment, and the commonly changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters are referred to as connector savers. L-com also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs.
Part number (MPN)
Impedance
50 Ohm
Frequency
DC
Interface
SMA
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Coaxial Adapters |
|---|---|
| Interface | SMA |
| Interface | F |
| Impedance | 50 Ohm |
| Impedance | 75 Ohm |
| Frequency (max) | DC |
| Frequency (max) | 2 GHz |
| Gender | Male |
| Gender | Female |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Plating 1 | Nickel |
Show 7 more specs
| Connector Polarity 1 | Standard |
|---|---|
| Connector Polarity 2 | Standard |
| Mounting | None |
| Mounting | None |
| Category | Coaxial Adapters |
| Application | Allows Connection Between Series |
| Product Features | SMA interface compliant with MIL-STD-348 |
Description
Current reference data for LCAD9793: SMA · 50 Ohm · DC. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. Frequency is listed as DC. The real operating limit still depends on the assembly, mating pair, and application context. If mounting is missing here, confirm it from the drawing or mating requirement. Material is listed as Brass. That is useful for review, but it does not replace full project stack-up confirmation. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
LCCA30184-FT1.5
L-com's LCCA30184-FT1.5 is a low loss SMA male to SMA male right angle cable assembly using LMR-240-DB coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this SMA cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to SMA cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle SMA cable interface on the LMR-240-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30184-FT1.5 L-com Low Loss SMA Male to SMA Male Right Angle Cable Assembly using LMR-240-DB Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
R413805115
Attenuators - Interconnects ATT SMA.86 11DB 4GHZ 2W
901-3348
SMA Straight Solder Plug RG-405 0.086-inch Conformable 50 Ohm
M3933/25-58N
Attenuators - Interconnects SMA QPL ATT
FGL.2T.316.CLLC85
T - Small Outdoor keyed Series connector
SMAP-58A-K
The SMAP-58A-K is an SMA Straight Plug connector, designed for coaxial cables. This connector is suitable for various high-frequency applications.Fits RG-58/U,RG-58A/U cables. It features a impedance 50Ω, operates up to 3GHz, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.), and an excellent V.S.W.R 1.3(Max.) at 0.5~3 GHz. Withstanding temperatures from -40 to +85°C. The contact is made of Brass/Gold-Plated/Soldered, while the body is Brass/Nickel Plating/Crimp.A crimping toolTA-34 or TA-35 is required for mounting. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.Learn more about the SMA RF connector in our technical guide.
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.