Product details
FMCN4415 — RP TNC Male Connector Solder Cup Terminal Solder Attachment 4 Hole Flange , .531 inch Hole Spacing
Part number (MPN)
Impedance
50 Ohms
Frequency
DC to 11 GHz
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Coaxial Connectors |
|---|---|
| Impedance | 50 Ohms |
| Frequency (max) | DC to 11 GHz |
| Signal Performance | 1.35:1 |
| Electrical Rating | 500 Vrms |
| Termination | 1.22 in [30.99 mm] |
| Operating Temperature | -65 to +165 deg C |
| Category | Coaxial Connectors |
Description
Current reference data for FMCN4415: 50 Ohms · DC to 11 GHz. Impedance is listed as 50 Ohms. If that parameter is critical, confirm it again in RFQ. Frequency is listed as DC to 11 GHz. The real operating limit still depends on the assembly, mating pair, and application context. For higher-frequency projects, include the drawing, cable path, and critical requirements in the first RFQ. If mounting is missing here, confirm it from the drawing or mating requirement. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
4521-60028
RF Adapters - In Series PTNC ST JCK-RCP F/H
N30T95-141S-
N plug to TNC reverse polarity jack bulkhead using .141 conformable
122379T
TNC Crimp Jack RG-174 RG-188 RG-316 Times LMR-100A 4-Hole Flange 50 Ohm
221506-5
RF Connectors / Coaxial Connectors PLUG 75 OHM COML TNC
VTM201
TNC connector; configuration: Jack Right Angle; impedance 50Ohm; mounting Bulkhead Mount
LCCA30342-FT1
L-com's LCCA30342-FT1 is a low loss N male to TNC male cable assembly using LMR-600-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30342-FT1 L-com Low Loss N Male to TNC Male Cable Assembly using LMR-600-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.