Product details
ATS-2002-12 — SMA connector; configuration: male / female; impedance 50 Ohm; frequency 12.4 GHz
Part number (MPN)
Impedance
50 Ohm
Frequency
12.4 GHz
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | SMA |
|---|---|
| Impedance | 50 Ohm |
| Frequency (max) | 12.4 GHz |
| Gender | male / female |
| Body Material | stainless steel |
| Compliance | Yes |
Description
Current reference data for ATS-2002-12: 50 Ohm · 12.4 GHz · male / female. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. Frequency is listed as 12.4 GHz. The real operating limit still depends on the assembly, mating pair, and application context. For higher-frequency projects, include the drawing, cable path, and critical requirements in the first RFQ. If mounting is missing here, confirm it from the drawing or mating requirement. Material is listed as stainless steel. That is useful for review, but it does not replace full project stack-up confirmation. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
LCCA30261-FT5
L-com's LCCA30261-FT5 is a low loss QMA male right angle to SMA male cable assembly using LMR-240 coax, 5 FT with Times Microwave components and ships same-day. The LMR-240 coax of this QMA cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com QMA to SMA cable assembly has a male to male gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this QMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle QMA cable interface on the LMR-240 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this QMA male to QMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30261-FT5 L-com Low Loss QMA Male Right Angle to SMA Male Cable Assembly using LMR-240 Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
A30A39-141F-18G
18GHz RL-16.5dB SMA plug to SMA plug right angle using .141 conformable with FEP jacket
PE45589
SMA Female Field Replaceable Connector 2 Hole Flange Mount 0.036 inch Pin, .481 inch Hole Spacing, with Metal Contact Ring
9176-1213-000
SMA / STRAIGHT JACK RECEPTACLE FEMALE GOLD NON-CAPTIVE CONTACT|3/8" SQUARE FLANGE
MS-156-HRMJ-11
RF Adapters - Between Series ADPT MS-156 PLUG/SMA JACK
A80N80-L195-
SMA jack to N jack using JBY195
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.