Product details
L-com's Reverse Polarity TNC Plug (RP-TNC Plug) Solderless Connector makes it quick and easy to terminate your cable assemblies. The captive center pin requires no crimping or soldering. Note: For use only with cables with solid center conductors
Part number (MPN)
Impedance
50 Ohm
Interface
TNC
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | CNT-195 |
|---|---|
| Interface | TWS-195 |
| Interface | CA-195 |
| Interface | Coaxial Connectors |
| Interface | TNC |
| Impedance | 50 Ohm |
| Gender | Plug |
| Orientation | Straight |
| Body Style | Straight |
| Polarity | Reverse Polarity |
| Mounting | None |
| Category | Coaxial Connectors |
Show 3 more specs
| Application | Low-loss coax cable assemblies |
|---|---|
| Product Features | Can be used with LMR®195, CNT-195, TWS-195 and L-com's CA-195 |
| Note | For use only with cables with solid center conductors |
Description
Current reference data for ARTP-1710: TNC · 50 Ohm · Straight. The catalog currently lists the configuration as: Straight. Impedance is listed as 50 Ohm. If that parameter is critical, confirm it again in RFQ. If mounting is missing here, confirm it from the drawing or mating requirement. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
122409
RF Connectors Coaxial Connectors TNC STRAIGHT JACK RG8XLMR240
031-6359
TNC Straight Receptacle Jack Solder Cup Bulkhead Front Mount 50 Ohm
6001-1051-002
TNC / STRAIGHT JACK FEMALE CLAMP TYPE FOR 2/50 S CABLE GOLD REAR MOUNT|PANEL SEALED
SD8281
50 ohm N plug to TNC jack DC Block inner from 10MHz to 3GHz rated 100 Volt in Brass
TNC8105-0179
TNC jack crimp bulkhead for RG179, IP67 mated, 600GHz VSWR1.2
LCCA30330-FT1.5
L-com's LCCA30330-FT1.5 is a low loss TNC male to N male cable assembly using LMR-600 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-600 coax of this TNC cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com TNC to N cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this TNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this TNC male to TNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30330-FT1.5 L-com Low Loss TNC Male to N Male Cable Assembly using LMR-600 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.