Product details
SMA Straight Crimp Jack RG-174 RG-188 RG-316 Times LMR-100A Bulkhead 50 Ohm
Part number (MPN)
Impedance
50
Frequency
12.4
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | RG-174, RG-188, RG-316, Times LMR-100A, Belden 7805A, Belden 8216, Belden 83269, Belden 83284, Belden 84316, Times RG-174LL, Shikoku 1.5DS-QFB-TA, Sumitomo 1.5DS-GXC-SP, Leoni DACAR 462, Leoni DACAR 462-2 |
|---|---|
| Impedance | 50 |
| Frequency (max) | 12.4 |
| Gender | Jack |
| Orientation | Straight |
| Termination | Solder |
| Termination | Cable - Crimp |
| Mounting | Bulkhead - Rear Mount |
| Body Material | Brass |
| Termination | Beryllium Copper |
| Body Finish | Nickel |
| Termination | Gold |
Show 14 more specs
| Coupling mechanism | Threaded |
|---|---|
| Termination | CTL-2 |
| Export Control Classification Number | EAR99 |
| IP rating | Not Rated |
| Insulator Material | PTFE |
| Isolated | No |
| Low PIM | No |
| Mil Qualified | Not Mil Qualified |
| Non Magnetic | No |
| Ports | 1 (Single Port) |
| Size Category | Subminiature |
| Temp (Max Degrees Celsius) | 165 |
| Temp (Min Degrees Celsius) | -65 |
| Coupling mechanism | Standard |
Description
Current reference data for 901-10013-RFX: 50 · 12.4 · Bulkhead - Rear Mount. The catalog currently lists the configuration as: Straight · Solder. Impedance is listed as 50. If that parameter is critical, confirm it again in RFQ. Frequency is listed as 12.4. The real operating limit still depends on the assembly, mating pair, and application context. For higher-frequency projects, include the drawing, cable path, and critical requirements in the first RFQ. Mounting is listed as Bulkhead - Rear Mount. If panel, bulkhead, or flange constraints matter, send the dimensions with the RFQ. Material is listed as Brass. That is useful for review, but it does not replace full project stack-up confirmation. The catalog also lists a sealing or protection value of Not Rated. Check that against the real environment requirement in RFQ. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
FMAD1011
SMA Male (plug) to SMP Male (plug) Limited Detent Adapter, Passivated Stainless Steel Body, 1.35 VSWR
PE45139
SMA Male Connector Solder Attachment 2 Hole Flange Mount Solder Cup Terminal
Flat (V-Groove) (2-core) SM LC-SMA905
This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a flat (v-groove) cable (2-core), single-mode (SM), with LC-SMA905 connectors.Example model: TFC-2C-SM-LC-SMA-1m-HYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.
A95T30-85T-
SMA reverse polarity jack bulkhead IP67 mated to TNC plug using .085 semi-rigid
RFC-NM-SMR-500
RF Cable Assemblies Low loss RF Cable, Cable length 5m, N Male to SMA Male RS connector
RFAA240P350P
Our RF Adapter Series offers Straight series connectors in: 1.85mm, 2.40mm, 2.92mm, 3.50mm, N Type, SMA, TNC, BNC, APC-7, Flange Mount and Right Angle. The RF Adapters are used to transfer signals from one connector interface to another.
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.