Product details
N-Type Panel Mount Jack 4-Hole Flange Round Post 50 Ohm
Part number (MPN)
Impedance
50
Frequency
6
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Specifications
| Interface | Not Applicable |
|---|---|
| Impedance | 50 |
| Frequency (max) | 6 |
| Gender | Jack |
| Orientation | Straight |
| Termination | Solder |
| Termination | Round Post |
| Mounting | 4-Hole Flange |
| Body Material | Brass |
| Termination | Phosphor Bronze |
| Body Finish | White Bronze |
| Termination | Gold |
Show 15 more specs
| Coupling mechanism | Threaded |
|---|---|
| Export Control Classification Number | EAR99 |
| Extended Dielectric Length | 0.732 Inches (18.59 mm) |
| IP rating | Not Rated |
| Insulator Material | PTFE |
| Isolated | No |
| Low PIM | No |
| Mil Qualified | Not Mil Qualified |
| Non Magnetic | No |
| Ports | 1 (Single Port) |
| Post Length | 0.831 Inches (21.11 mm) |
| Size Category | Standard |
| Temp (Max Degrees Celsius) | 165 |
| Temp (Min Degrees Celsius) | -65 |
| Coupling mechanism | Standard |
Description
Current reference data for 172183: 50 · 6 · 4-Hole Flange. The catalog currently lists the configuration as: Straight · Solder. Impedance is listed as 50. If that parameter is critical, confirm it again in RFQ. Frequency is listed as 6. The real operating limit still depends on the assembly, mating pair, and application context. For higher-frequency projects, include the drawing, cable path, and critical requirements in the first RFQ. Mounting is listed as 4-Hole Flange. If panel, bulkhead, or flange constraints matter, send the dimensions with the RFQ. Material is listed as Brass. That is useful for review, but it does not replace full project stack-up confirmation. The catalog also lists a sealing or protection value of Not Rated. Check that against the real environment requirement in RFQ. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
CCN-MM-RG58-12
RF Cable Assemblies 12" RG58 N-Type Straight Male/Male
095-909-164-024
RF Cable Assemblies N-Type Plg to N-Type Pg 18GHz Cable 24in
172263
N-Type Right Angle Crimp Plug Times LMR-600 Optimized 50 Ohm
082-5946
N-Type Straight Clamp Jack 1/2-inch Helical Corrugated 50 Ohm
082-6766
N-Type Straight Solder Jack RG-405 .086-inch Conformable Bulkhead 50 Ohm IP67
FMAT7482-30
Low PIM 30 dB Fixed Attenuator N-Type Female (Jack) to N-Type Female (Jack) 0.6 GHz to 6 GHz Rated to 100 Watts Anodized Aluminum 1.3:1 VSWR
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology is a China-based export sourcing partner for compatible alternatives and is not affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.