Product details
SMA PCB End Launch Straight Jack Bulkhead 50 Ohm High Frequency
Part number (MPN)
Impedance
50
Frequency
18
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | Not Applicable |
|---|---|
| Impedance | 50 |
| Frequency (max) | 18 |
| Gender | Jack |
| Orientation | Straight |
| Termination | Solder |
| Termination | PCB - End Launch |
| Mounting | Bulkhead - Rear Mount |
| Body Material | Brass |
| Termination | Beryllium Copper |
| Body Finish | Gold |
| Termination | Gold |
Show 14 more specs
| Coupling mechanism | Threaded |
|---|---|
| Export Control Classification Number | EAR99 |
| IP rating | Not Rated |
| Insulator Material | PTFE |
| Isolated | No |
| Low PIM | No |
| Mil Qualified | Not Mil Qualified |
| Non Magnetic | No |
| PCB Thickness (Max) | 0.062 Inches (1.57 mm) |
| Ports | 1 (Single Port) |
| Size Category | Subminiature |
| Temp (Max Degrees Celsius) | 165 |
| Temp (Min Degrees Celsius) | -65 |
| Coupling mechanism | Standard |
Description
Current reference data for 132371: 50 · 18 · Bulkhead - Rear Mount. The catalog currently lists the configuration as: Straight · Solder. Impedance is listed as 50. If that parameter is critical, confirm it again in RFQ. Frequency is listed as 18. The real operating limit still depends on the assembly, mating pair, and application context. For higher-frequency projects, include the drawing, cable path, and critical requirements in the first RFQ. Mounting is listed as Bulkhead - Rear Mount. If panel, bulkhead, or flange constraints matter, send the dimensions with the RFQ. Material is listed as Brass. That is useful for review, but it does not replace full project stack-up confirmation. The catalog also lists a sealing or protection value of Not Rated. Check that against the real environment requirement in RFQ. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
PE44426
SSMA Female Bulkhead Connector Crimp/Solder Attachment For RG188-DS, RG316-DS, .177 inch D Hole
FMHR0113
SMA Female Bulkhead to TNC Male MIL-DTL-17 Cable M17/119-RG174 Coax
0SR01R01072.0
RF Cable Assemblies 18GHz 72"L Mini-CP EndA SMA EndB SMA
LCCA30276-FT3
L-com's LCCA30276-FT3 is a low loss SMA male to TNC male cable assembly using LMR-240-DB coax, 3 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this SMA cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to TNC cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30276-FT3 L-com Low Loss SMA Male to TNC Male Cable Assembly using LMR-240-DB Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Flat (V-Groove) (2-core) OM3 SC-SC
This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a flat (v-groove) cable (2-core), multimode (OM3), with SC-SC connectors.Example model: TFC-2C-OM3-SC-SC-1m-HYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.
135100-01-12.00
RF Cable Assemblies SMA Str Plg - Blunt Cut 12 inch RG-316
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.