Product details
RP-SMA Straight Crimp Jack RG-178 RG-196 Bulkhead 50 Ohm
Part number (MPN)
Impedance
50
Frequency
12.4
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | RG-178, RG-196, Belden 83265 |
|---|---|
| Impedance | 50 |
| Frequency (max) | 12.4 |
| Gender | Jack |
| Orientation | Straight |
| Termination | Solder |
| Termination | Cable - Crimp |
| Mounting | Bulkhead - Rear Mount |
| Body Material | Brass |
| Termination | Beryllium Copper |
| Body Finish | Gold |
| Termination | Gold |
Show 14 more specs
| Coupling mechanism | Threaded |
|---|---|
| Termination | 47-10150 |
| Export Control Classification Number | EAR99 |
| IP rating | Not Rated |
| Insulator Material | PTFE |
| Isolated | No |
| Low PIM | No |
| Mil Qualified | Not Mil Qualified |
| Non Magnetic | No |
| Ports | 1 (Single Port) |
| Size Category | Subminiature |
| Temp (Max Degrees Celsius) | 165 |
| Temp (Min Degrees Celsius) | -65 |
| Coupling mechanism | Standard |
Description
Current reference data for 132220RP: 50 · 12.4 · Bulkhead - Rear Mount. The catalog currently lists the configuration as: Straight · Solder. Impedance is listed as 50. If that parameter is critical, confirm it again in RFQ. Frequency is listed as 12.4. The real operating limit still depends on the assembly, mating pair, and application context. For higher-frequency projects, include the drawing, cable path, and critical requirements in the first RFQ. Mounting is listed as Bulkhead - Rear Mount. If panel, bulkhead, or flange constraints matter, send the dimensions with the RFQ. Material is listed as Brass. That is useful for review, but it does not replace full project stack-up confirmation. The catalog also lists a sealing or protection value of Not Rated. Check that against the real environment requirement in RFQ. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
PE3C1761-HS
SMA Male Right Angle to N Male Right Angle Low Loss Cable Using LMR-200 Coax with HeatShrink
R125781000W
RF Adapters - Tee SMA TEE FML/FML FEMALE ADAP
A80E30-85S-
SMA jack to MMCX plug using .085 conformable
SSMA864S-2-6
SSMA jack SQ 9.5mm 4 hole flange with round contact (Φ0.86L=6), PTFE L=2 27GHz VSWR1.3
M3933/25-49S
Attenuators - Interconnects SMA QPL ATT SCREENED
LCCA30017-FT6
L-com low loss SMA male to N female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 6 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30017-FT6 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and N bulkhead connection on the other. This low loss SMA to N cable from L-com has a male to female gender combination. Our SMA male to N female coaxial assembly part number LCCA30017-FT6 can also be known as low loss SMA plug to N jack cable assembly when using alternate gender names. SMA plug to N jack cable assembly LCCA30017-FT6 is manufactured with a flexible coax. These flexible SMA to N cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss SMA male to N female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 6 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to N M/F cables is 18 GHz. Technical performance specifications on these 18 GHz SMA male to N female bulkhead cables are located on the LCCA30017-FT6 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss N female bulkhead to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to N female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 6 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to N female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 6 FT.
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.