Product details
TNC Right Angle Crimp Plug Belden 1694A 75 Ohm
Part number (MPN)
Impedance
75
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Specifications
| Interface | Belden 1694A, Belden 4694R, Belden 9248 |
|---|---|
| Impedance | 75 |
| Gender | Plug |
| Orientation | Right Angle |
| Termination | Solder |
| Termination | Cable - Crimp |
| Mounting | Not Applicable |
| Body Material | Brass |
| Termination | Brass |
| Alias | T1112A1-ND3G-1694A-75 |
| Body Finish | Nickel |
| Termination | Gold |
Show 12 more specs
| Coupling mechanism | Threaded |
|---|---|
| Export Control Classification Number | EAR99 |
| IP rating | Not Rated |
| Insulator Material | Delrin |
| Isolated | No |
| Low PIM | No |
| Mil Qualified | Not Mil Qualified |
| Non Magnetic | No |
| Ports | 1 (Single Port) |
| Size Category | Miniature |
| Temp (Max Degrees Celsius) | 85 |
| Temp (Min Degrees Celsius) | -40 |
Description
Current reference data for 122506: 75 · Right Angle · Solder. The catalog currently lists the configuration as: Right Angle · Solder. Impedance is listed as 75. If that parameter is critical, confirm it again in RFQ. If mounting is missing here, confirm it from the drawing or mating requirement. Material is listed as Brass. That is useful for review, but it does not replace full project stack-up confirmation. The catalog also lists a sealing or protection value of Not Rated. Check that against the real environment requirement in RFQ. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
6001-7051-003
TNC / STRAIGHT JACK FEMALE CLAMP TYPE FOR 2.6/50 S CABLE NICKEL REAR MOUNT|PANEL SEALED
TNC8305LL-0141
TNC jack solder bulkhead, IP67 mated, for low loss .141 semi rigid; 3.6GHz VSWR1.2
TNC8F46ED-EM36
TNC field replaceable jack, SQ 17.5mm (.687inch) 4 hole flange with metal ring, accepts ϕ0.91mm (.036inch) pin, 18GHz VSWR1.2
N30T85-174-
N plug to TNC jack bulkhead using RG174
SD8264
50 ohm TNC plug to TNC jack DC Block inner from 50MHz to 18GHz rated 200 Volt in Stainless Steel
FMCA2883
RA TNC Male to RA TNC Male Cable Tinned Copper RG402 Type .141 Coax
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology is a China-based export sourcing partner for compatible alternatives and is not affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.