Product details
RF Connectors Coaxial Connectors BNC BULKHEAD JACK RG 58195 REV POLARITY
Part number (MPN)
Impedance
50 Ohms
Frequency
4 GHz
Need a custom version from drawing?
We coordinate supplier-qualified RF connector and cable assembly sourcing from drawings, samples, or BOM. Typical production lead time is 3–6 weeks after drawing/spec review; feasibility, MOQ, and fit are confirmed by RFQ.
Before RFQ Clear inputs speed up review. ⌄
- • Share the reference MPN and source brand if it matters.
- • Add the BOM and volume split for production projects.
- • Attach the drawing or the key fit requirements.
Image
Click image to enlarge.
Specifications
| Interface | RG-58, 141, LMR195 |
|---|---|
| Interface | RP-BNC |
| Impedance | 50 Ohms |
| Frequency (max) | 4 GHz |
| Gender | Jack (Pin) |
| Orientation | Straight |
| Termination | Crimp |
| Mounting | Bulkhead - Rear Mount |
| Product | Connectors |
| Polarity | Reverse |
| IP rating | - |
| Packaging | Bulk |
Description
Current reference data for 112202RP: 50 Ohms · 4 GHz · Bulkhead - Rear Mount. The catalog currently lists the configuration as: Straight · Crimp. Impedance is listed as 50 Ohms. If that parameter is critical, confirm it again in RFQ. Frequency is listed as 4 GHz. The real operating limit still depends on the assembly, mating pair, and application context. Mounting is listed as Bulkhead - Rear Mount. If panel, bulkhead, or flange constraints matter, send the dimensions with the RFQ. Use this page to shortlist before RFQ, not as the final sign-off.
Use this page to shortlist before RFQ. MOQ 200+ custom production and supply path are confirmed after drawing/spec/BOM review; no spot stock is assumed.
Similar Connectors
Related models:
AD-B8BA3
BNC jack to single banana plug
EHBNC2PKG
RF Connectors / Coaxial Connectors EH SERIES 75 OHM BNC
LCCA30320-FT3
L-com's LCCA30320-FT3 is a low loss BNC male to N male right angle cable assembly using LMR-400-DB coax, 3 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this BNC cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com BNC to N cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this BNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this BNC male to BNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30320-FT3 L-com Low Loss BNC Male to N Male Right Angle Cable Assembly using LMR-400-DB Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
FMCN1898
BNC Female Connector Clamp/Solder Attachment For FM-SR141ALTN, FM-SR141TB, RG402
CCTN58P-5B
These plenum grade RG58/U Ethernet cable assemblies are designed for high temperature applications that require flame retardant properties. The 50 Ohm BNC connectors utilize a heat shrink strain relief for a robust assembly. The coaxial cable features double shielding to meet the shielding parameters found in section 10.5 of IEEE 802.3 specification. We stock these assemblies in a wide range of standard lengths from 1 to 100 ft.
R141426265
BNC / STRAIGHT JACK RECEPTACLE FOR PCB TIN SOLDER LEGS
MPN Search Supports exact, prefix, and partial matching. ⌄
Disclaimer
Manufacturer names, trademarks, symbols, and part numbers are used for identification and cross-reference only. Cstone Technology operates its own factory for RF/coaxial connectors, adapters, and cable assemblies and is not a trading company or affiliated with the original brands. Trademarks remain the property of their respective owners. Final suitability is confirmed by drawing/spec review during RFQ.