Produktdetails
The TA-PJ-20 is an TNC Attenuator. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 2 GHz, and an excellent V.S.W.R 1.2(Max.) at DC~2GHz. The contact is made of Gold Plating, while the body is Brass/Nickel Plating. Rated Power is 1W.Attenuation is 20±1.2dB up to 2GHz. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.
Teilenummer (MPN)
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Schnittstelle | TNC Coaxial Attenuator |
|---|---|
| IP-Schutzart | {'text': "The TA-PJ-20 is an TNC Attenuator. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 2 GHz, and an excellent V.S.W.R 1.2(Max.) at DC~2GHz. The contact is made of Gold Plating, while the body is Brass/Nickel Plating. Rated Power is 1W.Attenuation is 20±1.2dB up to 2GHz. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging."} |
| Specifications | {'Connector Gender': 'Plug-Jack', 'Impedance (Ohms)': '50Ω', 'Operating Frequency Range': '2 GHz', 'V.S.W.R': '1.2(Max.) at DC~2GHz', 'Rated Power (W)': '1W', 'Attenuation (dB)': '20±1.2dB up to 2GHz'} |
| Material/Plating/Attachment | {'Contact': 'Gold Plating', 'Body': 'Brass/Nickel Plating'} |
| Category | TNC Coaxial Attenuator |
| Product Features | 50Ω; Coaxial Attenuator; Made to order product; RoHS2 |
Beschreibung
Für TA-PJ-20 ist eine Referenz-MPN angegeben; die endgültige Bestätigung hängt von Zeichnung, Spezifikation oder BOM ab. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Das Material ist als {'Contact': 'Gold Plating', 'Body': 'Brass/Nickel Plating'} angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
PT40080NT
RF Kabelkonfektion CASSY, A400, NM, TNC M
PE3W02753-HS
Reverse Polarity TNC Male to N Female Bulkhead Cable Using LMR-400 Coax with HeatShrink
095-850-275-006
TNC Straight Plug to TNC Straight Plug RG-142 6 inches
SM5708
TNC Male (Plug) to TNC Female (Jack) Adapter, Nickel Plated Brass Body, High Temp, 1.25 VSWR
LCCA30208-FT1
L-com's LCCA30208-FT1 is a low loss TNC male right angle to TNC male cable assembly using LMR-400-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this TNC cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com TNC to TNC cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this TNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-400-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this TNC male to TNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30208-FT1 L-com Low Loss TNC Male Right Angle to TNC Male Cable Assembly using LMR-400-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
095-850-274M300
TNC Straight Plug to TNC Straight Plug RG-58 3 M
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Cstone Technology ist ein in China ansässiger Export-Beschaffungspartner für kompatible Alternativen und steht in keiner Verbindung zu den Originalmarken. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.