Produktdetails
The SMA-LA(Pa) is an SMA Right Angle adaptor connector. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 12.4GHz, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (4 mΩ(Max.), and an excellent V.S.W.R 1.2(Max.) at DC~12.4GHz. Withstanding temperatures from -55 to +155°C. The contact is made of Beryllium Copper/Brass/Gold Plating, while the body is Stainless/Passivate Treatment. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.Learn more about the SMA RF connector in our technical guide.
Teilenummer (MPN)
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Schnittstelle | SMA Adaptor(Right Angle) |
|---|---|
| IP-Schutzart | {'text': "The SMA-LA(Pa) is an SMA Right Angle adaptor connector. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 12.4GHz, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (4 mΩ(Max.), and an excellent V.S.W.R 1.2(Max.) at DC~12.4GHz. Withstanding temperatures from -55 to +155°C. The contact is made of Beryllium Copper/Brass/Gold Plating, while the body is Stainless/Passivate Treatment. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.Learn more about the SMA RF connector in our technical guide."} |
| Specifications | {'Connector Gender': 'Plug-Jack', 'Impedance (Ohms)': '50Ω', 'Operating Frequency Range': '12.4GHz', 'Insulation Resistance': '5000MΩ(Min.) at DC 500V', 'Withstand Voltage': 'AC 1000V(1 minute)', 'Contact Resistance': '4 mΩ(Max.)', 'V.S.W.R': '1.2(Max.) at DC~12.4GHz', 'Operating Temperature Range': '-55 to +155°C'} |
| Material/Plating/Attachment | {'Contact': 'Beryllium Copper/Brass/Gold Plating', 'Body': 'Stainless/Passivate Treatment'} |
| Category | SMA Adaptor(Right Angle) |
| Product Features | 50Ω; Adaptor(Right Angle); Products in stock; RoHS2 |
Beschreibung
Für SMA-LA(Pa) ist eine Referenz-MPN angegeben; die endgültige Bestätigung hängt von Zeichnung, Spezifikation oder BOM ab. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Das Material ist als {'Contact': 'Beryllium Copper/Brass/Gold Plating', 'Body': 'Stainless/Passivate Treatment'} angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
LCCA30245-FT3
L-com's LCCA30245-FT3 is a low loss SMA male to reverse polarity TNC female cable assembly using LMR-200-FR coax, 3 FT with Times Microwave components and ships same-day. The LMR-200-FR coax of this SMA cable uses the PE dielectric with a VoP of 83%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to TNC cable assembly has a male to female gender configuration with flexible LMR-200-FR series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30245-FT3 L-com Low Loss SMA Male to Reverse Polarity TNC Female Cable Assembly using LMR-200-FR Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
PE91484
Low PIM 4.3-10 Male to SMA Female Adapter
AD-A8A8-BFL-G
SMA Buchse zu SMA Buchse bulkhead, IP67 mated, 18 GHz VSWR1.2
A30T80-141S-
SMA Stecker zu TNC Buchse using .141 conformable
PE9077
SMA Female to TNC Male Adapter
M3933/25-64N
Attenuators - Interconnects SMA Atten M/F 2W 3dB DC-12.4 GHz QPL
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.