CSTONE
RFQ-Liste

Produktdetails

TNC männlich Shorting Dust Cap mit 4 Inch Chain

Kompatible Alternative aus China — die Passung bestätigen wir anhand Ihrer Zeichnung/Spezifikation.

Teilenummer (MPN)

PE6134

kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing

Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.

RF-Kabel nach Zeichnung →
WhatsApp — Schnelle Antwort
Lieferzeit: 3–6 Wo. | MOQ: 200+ Stk.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
  • • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
  • • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
  • • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.

Bild

Zum Vergrößern klicken.

Produktbild

PE6134 product photo

PE6134 product photo

1 / 3

Specifications

Specifications for PE6134
Steckverbinder SerieTNC
Steckverbinder Geschlechtmännlich
Chain OptionChain
ProdukttypShorts und Caps
CategoryShorts und Caps
GehäusematerialMessing
GehäuseoberflächeNickel

Beschreibung

Für PE6134 ist eine Referenz-MPN angegeben; die endgültige Bestätigung hängt von Zeichnung, Spezifikation oder BOM ab. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Das Material ist als Messing angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.

Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.

Ähnliche Steckverbinder

Diese Modelle könnten ebenfalls interessant sein:

FMHR0205

Temperature Conditioned Low Loss TNC Male to TNC Female Bulkhead Cable LL160 Coax

Details anzeigen →

122248RP-10

RP-TNC Receptacle Jack Round Post 4-Hole Flange 50 Ohm

Details anzeigen →

LCCA30647-FT1

L-com N männlich abgewinkelt zu TNC männlich abgewinkelt Kabelkonfektion using LC085TBJ coax, 1 FT is available für same day shipping from our facility. This hoch quality N Kabel is part of a large selection of in-stock, commercial-off-the-shelf und custom-built koaxial Kabelkonfektion für RF / microwave that all ship the same business day as they are ordered. LCCA30647-FT1 N Kabel from L-com are a great choice für solutions requiring hoch quality und rapid shipping. These hoch-quality RF coax Kabelkonfektion can be used für telecom, military / defense, laboratory test und measurement, industrial / commercial und many other applications. Our expert technical support und knowledgeable sales teams are ready zu help answer your RF koaxial Kabelkonfektion questions.These RF koaxial Kabelkonfektion are built mit abgewinkelt N connection on one end und abgewinkelt TNC connection on the other. This abgewinkelt N zu abgewinkelt TNC Kabel from L-com has a männlich zu männlich Geschlecht combination. Our N männlich zu TNC männlich koaxial Konfektion part number LCCA30647-FT1 can also be known as abgewinkelt N Stecker zu abgewinkelt TNC Stecker Kabelkonfektion when using alternate Geschlecht names. N Stecker zu TNC Stecker Kabelkonfektion LCCA30647-FT1 is manufactured mit a formable coax. These formable N zu TNC Kabelkonfektion use LC085TBJ coax und are single geschirmt. L-com single geschirmt N männlich abgewinkelt zu TNC männlich abgewinkelt Kabelkonfektion using LC085TBJ coax, 1 FT is built from quality components by skilled assemblers mit many years of experience.Maximum frequency für these N zu TNC M/M Kabel is 6 GHz. Technical performance specifications on these 6 GHz N abgewinkelt männlich zu TNC abgewinkelt männlich Kabel are located on the LCCA30647-FT1 datasheet PDF along mit CAD drawing und dimensions. The L-Com RF Kabelkonfektion data sheet mit specs, drawing dimensions can be found on this product page just above. Our Custom Kabel Configurator is where zu find und build customized versions of this RF koaxial Konfektion or many other Steckverbinder und coax combinations that all ship the same-day. This product can also be called a abgewinkelt TNC männlich zu abgewinkelt N männlich Kabelkonfektion because it can be used in the opposite direction.N männlich abgewinkelt zu TNC männlich abgewinkelt Kabelkonfektion using LC085TBJ coax, 1 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf und custom versions of our abgewinkelt N zu abgewinkelt TNC Kabelkonfektion available für same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons und more, L-com should be your number one source für wired und wireless connectivity products like our N männlich abgewinkelt zu TNC männlich abgewinkelt Kabelkonfektion using LC085TBJ coax, 1 FT.

Details anzeigen →

R143322700

TNC 18 / gerade BULKHEAD Buchse Panel SEAL REAR Montage lötbar Typ - Kabel .250

Details anzeigen →

LCCA30103-FT1

L-com TNC männlich zu TNC männlich Kabelkonfektion using LC141TBJ coax, 1 FT is available für same day shipping from our facility. This hoch quality TNC Kabel is part of a large selection of in-stock, commercial-off-the-shelf und custom-built koaxial Kabelkonfektion für RF / microwave that all ship the same business day as they are ordered. LCCA30103-FT1 TNC Kabel from L-com are a great choice für solutions requiring hoch quality und rapid shipping. These hoch-quality RF coax Kabelkonfektion can be used für telecom, military / defense, laboratory test und measurement, industrial / commercial und many other applications. Our expert technical support und knowledgeable sales teams are ready zu help answer your RF koaxial Kabelkonfektion questions.These RF koaxial Kabelkonfektion are built mit TNC connection on one end und TNC connection on the other. This TNC zu TNC Kabel from L-com has a männlich zu männlich Geschlecht combination. Our TNC männlich zu TNC männlich koaxial Konfektion part number LCCA30103-FT1 can also be known as TNC Stecker zu TNC Stecker Kabelkonfektion when using alternate Geschlecht names. TNC Stecker zu TNC Stecker Kabelkonfektion LCCA30103-FT1 is manufactured mit a formable coax.Maximum frequency für these TNC zu TNC M/M Kabel is 6 GHz. Technical performance specifications on these 6 GHz TNC männlich zu TNC männlich Kabel are located on the LCCA30103-FT1 datasheet PDF along mit CAD drawing und dimensions. The L-Com RF Kabelkonfektion data sheet mit specs, drawing dimensions can be found on this product page just above. Our Custom Kabel Configurator is where zu find und build customized versions of this RF koaxial Konfektion or many other Steckverbinder und coax combinations that all ship the same-day.TNC männlich zu TNC männlich Kabelkonfektion using LC141TBJ coax, 1 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf und custom versions of our TNC zu TNC Kabelkonfektion available für same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons und more, L-com should be your number one source für wired und wireless connectivity products like our TNC männlich zu TNC männlich Kabelkonfektion using LC141TBJ coax, 1 FT.

Details anzeigen →

VT40-2031

TNC Steckverbinder; configuration: Buchse gerade crimp; impedance 50 Ω; Montage Bulkhead Montage; Kabel RG-59

Details anzeigen →
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄

Unterstützt exakte, Präfix- und Teiltreffer.

Haftungsausschluss

Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.