Produktdetails
7/16 DIN männlich Low PIM Steckverbinder lötbar Attachment für PE-1/4SFHC, SPP-250-LLPL, SPO-250, SPF-250
Teilenummer (MPN)
Schnittstelle
PE-1/4SFHC
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Schnittstelle | PE-1/4SFHC |
|---|---|
| Schnittstelle | SPP-250-LLPL |
| Schnittstelle | SPO-250 |
| Schnittstelle | SPF-250 |
| Polarität | Standard |
| Steckverbinder Serie | 7/16 DIN |
| Steckverbinder Geschlecht | männlich |
| Impedanz | 50 Ohm |
| Gehäuseform | Gerade |
| Attachment Method | lötbar/lötbar |
| Montage Method | None |
| Min. Frequenz | DC |
Show 4 more specs
| Max. Frequenz | 6 GHz |
|---|---|
| Produkttyp | Steckverbinder |
| Category | Steckverbinder |
| Ausrichtung | Gerade |
Beschreibung
Aktuelle Referenzdaten für PE45660: PE-1/4SFHC. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
LCCA30282-FT4
L-com's LCCA30282-FT4 is a low loss 4.3-10 männlich zu N männlich Kabelkonfektion using LMR-240-DB coax, 4 FT mit Times Microwave components und ships same-day. The LMR-240-DB coax of this 4.3-10 Kabel uses the PE (F) dielectric mit a VoP of 84%, resulting in very low insertion loss compared zu solid dielectrics. These flexible RF Kabelkonfektion are ideal für applications where flexure is required. Our L-com 4.3-10 zu N Kabelkonfektion has a männlich zu männlich Geschlecht configuration mit flexible LMR-240-DB Serie coax und operates zu 5.8 GHz. The double shield of this 4.3-10 Kabel is layered by tinned Kupfer braid over Aluminium tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 männlich zu 4.3-10 männlich Kabel, along mit the rest of L-com's other RF Konfektionen, can also be built und shipped same day. Other available RF Kabelkonfektion value added services from L-com include Steckverbinder orientation or clocking, heat shrink booting und custom labeling. RF testing can also be performed zu document the electrical performance of your Kabelkonfektion. Kontakt a sales representative für testing or custom RF Kabel quotes. Part number LCCA30282-FT4 L-com Low Loss 4.3-10 männlich zu N männlich Kabelkonfektion using LMR-240-DB Coax, 4 FT mit Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) und dimensions below.
LCCA30347-FT6
L-com's LCCA30347-FT6 is a low loss 7/16 DIN männlich zu N männlich abgewinkelt Kabelkonfektion using LMR-600-DB coax, 6 FT mit Times Microwave components und ships same-day. The LMR-600-DB coax of this 7/16 DIN Kabel uses the PE (F) dielectric mit a VoP of 87%, resulting in very low insertion loss compared zu solid dielectrics. These flexible RF Kabelkonfektion are ideal für applications where flexure is required. Our L-com 7/16 DIN zu N Kabelkonfektion has a männlich zu männlich Geschlecht configuration mit flexible LMR-600-DB Serie coax und operates zu 5.8 GHz. The double shield of this 7/16 DIN Kabel is layered by tinned Kupfer braid over Aluminium tape providing shielding effectiveness greater than 90dB. This abgewinkelt N Kabel interface on the LMR-600-DB coax allows für easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN männlich zu 7/16 DIN männlich Kabel, along mit the rest of L-com's other RF Konfektionen, can also be built und shipped same day. Other available RF Kabelkonfektion value added services from L-com include Steckverbinder orientation or clocking, heat shrink booting und custom labeling. RF testing can also be performed zu document the electrical performance of your Kabelkonfektion. Kontakt a sales representative für testing or custom RF Kabel quotes. Part number LCCA30347-FT6 L-com Low Loss 7/16 DIN männlich zu N männlich abgewinkelt Kabelkonfektion using LMR-600-DB Coax, 6 FT mit Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) und dimensions below.
SMD7FRA120
DIN Steckverbinder 3 °C MINI DIN abgewinkelt PC MT UNSHLD SNAP-IN
NP-58A
The NP-58A is an N gerade Stecker Steckverbinder, designed für koaxial Kabel. This Steckverbinder is suitable für various hoch-frequency applications.Fits RG-58/U,RG-58A/U Kabel. It features a impedance 50Ω, operates up zu 10 GHz, und has a rated voltage of AC 500V, ensures a hoch insulation resistance (1000MΩ(Min.) at DC 500V), a low Kontakt resistance (3 mΩ(Max.). Withstanding temperatures from -40 zu + 85 °C. The Kontakt is made of Messing/Gold-plattiert/Soldered, while the body is Messing/Nickel Plating/Crimp.A crimping toolTA-34 or TA-35 is required für Montage. We can customize our products für you. We offer total customization, including changes zu a product's shape, length, material, surface treatment, und packaging. Available from 1 piece für in-stock items.
CC-6NMNM040
Customers designed the L-com CC-6NMNM040 low loss N männlich zu N männlich hoch running RF Kabelkonfektion mit CA-600, which we now offer as a Standard. This flexible 50 Ω low loss Kabel is intended für use in laboratories, universities, communications, aerospace, und military defense sectors. Our männlich-zu-männlich Kabelkonfektion includes 50 Ω männlich-Typ Steckverbinder on both ends mit crimp attachments und Gold-plattiert Messing Kontakte. Our RF Kabel is constructed mit a solid Kupfer clad Aluminium center conductor und a PE dielectric, making it perfect für installers, manufacturers, und prototypes. This black RF Kabelkonfektion features a PE jacket mit a diameter of 0.590 inches. The CC-6NMNM040 N männlich zu N männlich low loss Kabelkonfektion has a maximum frequency of 5.8 GHz. Our in-Serie Kabelkonfektion's maximum VSWR is 1.5: 1. The L-com RF Kabelkonfektion is 40 feet long, mit a minimum bend radius of 1.5 inch für single bends und 6 inches für repeated bends. Our 40-foot CA-600 Kabelkonfektion has an 87% velocity of propagation und a minimum RF shielding of 90 dB. L-com has the largest in-stock selection of CA-600 RF Kabelkonfektion für international und domestic orders mit same-day shipment. We are a global leader of wired und wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, und telecommunication. für further information on similar products, our expert technical support und knowledgeable sales team can help you get the perfect low loss N männlich zu N männlich Kabelkonfektion für your requirements.
T3374-504
Circular DIN Steckverbinder männlich Kabel Steckverbinder 5 WAY
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.