Produktdetails
BNC Male to HN Male Cable Using RG393 Coax
Teilenummer (MPN)
Impedanz
50 Ohm
Schnittstelle
BNC
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Schnittstelle | Cable Assemblies |
|---|---|
| Schnittstelle | RG393 |
| Schnittstelle | BNC |
| Schnittstelle | HN |
| Impedanz | 50 Ohm |
| Impedanz | 50 Ohm |
| Impedanz | 50 Ohm |
| Geschlecht | Male |
| Geschlecht | Male |
| Ausrichtung | Straight |
| Ausrichtung | Straight |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Nickel |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Kabeltyp | RG393/U |
| Category | Cable Assemblies |
Beschreibung
Aktuelle Referenzdaten für PE3W12755: BNC · 50 Ohm · Straight. Der Katalog listet die Konfiguration als: Straight. Die Impedanz ist als 50 Ohm angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Das Material ist als Brass angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
095-850-232M125
RF Kabelkonfektion BNC gerade Stecker zu BNC gerade Jck 4855R 1.25m
LCCA30675-FT3
L-com N male to BNC male cable assembly using RG58 coax, 3 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30675-FT3 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N connection on one end and BNC connection on the other. This N to BNC cable from L-com has a male to male gender combination. Our N male to BNC male coaxial assembly part number LCCA30675-FT3 can also be known as N plug to BNC plug cable assembly when using alternate gender names. N plug to BNC plug cable assembly LCCA30675-FT3 is manufactured with a flexible coax. These flexible N to BNC cable assemblies use RG58 coax and are single shielded. L-com single shielded N male to BNC male cable assembly using RG58 coax, 3 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to BNC M/M cables is 1 GHz. Technical performance specifications on these 1 GHz N male to BNC male cables are located on the LCCA30675-FT3 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a BNC male to N male cable assembly because it can be used in the opposite direction.N male to BNC male cable assembly using RG58 coax, 3 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to BNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male to BNC male cable assembly using RG58 coax, 3 FT.
CC58C-1HR
In applications where the normal RG58C/U assembly with two straight BNC connectors will not work we offer a series of assemblies that utilize a right angle BNC connector on one end. This box style right angle connector allows coupling in tight fit areas with little room. We offer these highly popular coaxial cable assemblies with molded strain reliefs for maximum durability. All our RG58C/U series BNC connectors feature gold plated center contacts for minimal attenuation and nickel plated bodies for enhanced corrosion resistance. Typically stocked in 9 standard lengths from 1 to 10 ft ready for immediate delivery.
PE9223
GR874 to BNC Male Adapter
CCTN58-6B
These 10BASE-2 coaxial cable assemblies are specifically designed for use in Ethernet applications. The BNC connectors are fully insulated to avoid ground loop problems. The R9907 style 50 Ohm cable is commonly found in CheaperNet configurations and features double shielding to meet the shielding parameters found in section 10.5 of IEEE 802.3 specification. We stock these assemblies in a wide range of standard lengths from 1 to 100 ft.
112659-75
BNC abgewinkelt PCB Buchse Durchsteckmontage 75 Ω
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.