Produktdetails
7/16 DIN männlich abgewinkelt zu 7/16 DIN weiblich 4 Hole Flange Low PIM Kabel Using TFT-402 Coax Using Times Microwave Components
Teilenummer (MPN)
Impedanz
50 Ohm
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Impedanz | 50 Ohm |
|---|---|
| Impedanz | 50 Ohm |
| Impedanz | 50 Ohm |
| Steckverbinder Serie 1 | 7/16 DIN |
| Steckverbinder Geschlecht 1 | männlich |
| Steckverbinder Polarität 1 | Standard |
| Steckverbinder Winkel 1 | Abgewinkelt |
| Steckverbinder Montage Method 1 | None |
| Steckverbinder Serie 2 | 7/16 DIN |
| Steckverbinder Geschlecht 2 | weiblich |
| Steckverbinder Polarität 2 | Standard |
| Steckverbinder Winkel 2 | Gerade |
Show 5 more specs
| Steckverbinder Montage Method 2 | 4 Hole Flange |
|---|---|
| RF Kabel Part Number | TFT-402 |
| RF Kabel Typ | TFT-402 |
| Produkttyp | Kabelkonfektionen |
| Category | Kabelkonfektionen |
Beschreibung
Aktuelle Referenzdaten für PE3C7965: 50 Ohm. Die Impedanz ist als 50 Ohm angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
LC3MP2396-12
The L-com LC3MP2396-12 MIL-STD-1553 flexible RF Kabelkonfektion is perfect für applications that need tight bends und flexible Kabel. This TRB 3-lug zu TRB 2-slot Kabelkonfektion is Stecker zu Buchse und made of 78 Ω flexible 30-02001-LC twinax. Our 78 Ω Kabelkonfektion is available mit a PVC jacket und a Kupfer inner conductor mit Silber plating. We offer a blue, 0.57-inch OD TRB 3-lug zu TRB 2-slot Kabel that operates at 400 MHz.This blue RF Kabelkonfektion is the most commonly utilized Kabelkonfektion in wide connectivity applications such as bus couplers, avionics control boxes, und bus relay. L-com's LC3MP2396-12 MIL-STD-1553 flexible RF Kabelkonfektion is available mit PE dielectric. Our TRB 3-lug Stecker zu TRB 2-slot Buchse Kabel has bayonet coupling Steckverbinder made of Messing mit Nickel plating. This RF flexible 30-02001-LC twinax Kabel operates between -20 und 75 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF Kabelkonfektion mit same-day shipment für domestic und international orders. We are a global leader of wired und wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, und telecommunication. für further information on similar products, our expert technical support und trained sales team can get you the perfect TRB 3-lug Stecker zu TRB 2-slot Buchse Kabel as per your requirements.
CA-6DMNM200
hoch quality fully tested 7/16 DIN männlich zu Typ N-männlich Kabelkonfektion featuring hoch performance 600-Series coax Kabel. These coax Kabel have excellent low loss characteristics. Not exactly what you are looking für? Build your own Kabelkonfektion mit our Custom Product Configurator.
LC3CA2219-60
The L-com LC3CA2219-24 MIL-STD-1553 flexible RF Kabelkonfektion is perfect für applications that need tight bends und flexible Kabel. This TRB 3-slot zu blunt cut Kabelkonfektion is Stecker zu blunt cut und made of 78 Ω flexible 30-02001-LC twinax. Our 78 Ω Kabelkonfektion is available mit a PVC jacket und a Kupfer inner conductor mit Silber plating. We offer a blue, 0.57-inch OD TRB 3-slot zu blunt cut Kabel that operates at 400 MHz.This blue RF Kabelkonfektion is the most commonly utilized Kabelkonfektion in wide connectivity applications such as bus couplers, avionics control boxes, und bus relay. L-com's LC3CA2219-24 MIL-STD-1553 flexible RF Kabelkonfektion is available mit PE dielectric. Our TRB 3-slot Stecker zu blunt cut Kabel has bayonet coupling Steckverbinder made of Messing mit Nickel plating. This RF flexible 30-02001-LC twinax Kabel operates between -20 und 75 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF Kabelkonfektion mit same-day shipment für domestic und international orders. We are a global leader of wired und wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, und telecommunication. für further information on similar products, our expert technical support und trained sales team can get you the perfect TRB 3-slot Stecker zu blunt cut Kabel as per your requirements.
7/16P-NP
The 7/16P-NP is an In/Between Serie Adapter . This Steckverbinder is suitable für various hoch-frequency applications. It features a impedance 50Ω, und has a rated voltage of AC 1kV max. at 50 Hz, ensures a hoch insulation resistance (5GΩ(Min.) at DC 500V), a low Kontakt resistance (1.5 mΩ(Max.), und an excellent V.S.W.R 1.2(Max.) at DC~6 GHz. Withstanding temperatures from -45 zu + 85 °C. The Kontakt is made of Messing/Silber Plating, while the body is Messing/Ternary Plating. We can customize our products für you. We offer total customization, including changes zu a product's shape, length, material, surface treatment, und packaging. Available from 1 piece für in-stock items.
165X02609X
D-Sub-Rückenschalen 9P EMI/RFI SHIELDING METAL HOOD
4.3/10J-NJ
The 4.3/10J-NJ is an In/Between Serie Adapter . This Steckverbinder is suitable für various hoch-frequency applications. It features a impedance 50Ω, operates up zu 6 GHz, und has a rated voltage of AC 500V, ensures a hoch insulation resistance (5000MΩ(Min.) at DC 500V), a low Kontakt resistance (1 mΩ(Max.) (4.3/10),1.5 mΩ(Max.) (N), und an excellent V.S.W.R 1.2(Max.) at DC~6 GHz. Withstanding temperatures from -40 zu + 85 °C. The Kontakt is made of Berylliumkupfer/Silber Plating, while the body is Phosphorbronze/Messing/Silber Plating/Ternary Plating. We can customize our products für you. We offer total customization, including changes zu a product's shape, length, material, surface treatment, und packaging. Available from 1 piece für in-stock items.
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.