Produktdetails
Snap-On MMBX Plug to SMA Female Cable Using RG178 Coax
Teilenummer (MPN)
Impedanz
50 Ohm
Schnittstelle
MMBX
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Schnittstelle | Cable Assemblies |
|---|---|
| Schnittstelle | RG178 |
| Schnittstelle | MMBX |
| Schnittstelle | SMA |
| Impedanz | 50 Ohm |
| Impedanz | 50 Ohm |
| Impedanz | 50 Ohm |
| Geschlecht | Plug |
| Geschlecht | Female |
| Ausrichtung | Straight |
| Ausrichtung | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Montage | None |
|---|---|
| Connector Polarity 2 | Standard |
| Montage | None |
| Kabeltyp | RG178B/U |
| Category | Cable Assemblies |
Beschreibung
Aktuelle Referenzdaten für PE3C3999: MMBX · 50 Ohm · Straight. Der Katalog listet die Konfiguration als: Straight. Die Impedanz ist als 50 Ohm angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
LCCA30355-FT10
L-com SMA male to BNC male cable assembly using RG223 coax, 10 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30355-FT10 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with SMA connection on one end and BNC connection on the other. This SMA to BNC cable from L-com has a male to male gender combination. Our SMA male to BNC male coaxial assembly part number LCCA30355-FT10 can also be known as SMA plug to BNC plug cable assembly when using alternate gender names. SMA plug to BNC plug cable assembly LCCA30355-FT10 is manufactured with a flexible coax. These flexible SMA to BNC cable assemblies use RG223 coax and are double shielded. L-com double shielded SMA male to BNC male cable assembly using RG223 coax, 10 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to BNC M/M cables is 4 GHz. Technical performance specifications on these 4 GHz SMA male to BNC male cables are located on the LCCA30355-FT10 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a BNC male to SMA male cable assembly because it can be used in the opposite direction.SMA male to BNC male cable assembly using RG223 coax, 10 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to BNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA male to BNC male cable assembly using RG223 coax, 10 FT.
FMC00093
SMA Male to BNC Male Cable RG-142 Coax
CA-628485-A43
RF Kabelkonfektion test HS Kupfer Kabel 39999 zu HS SMA
PE3W17553-HS
SMA Male to TNC Female Low Loss Cable Using LMR-240 Coax with HeatShrink
2052-3510-02
RF-Steckverbinder / Koaxial-Steckverbinder SMA 2HOLE Buchse RECPT FLANGE Montage
LCCA30610-FT1
L-com SMA male right angle to N male right angle cable assembly using LC085TBJ coax, 1 FT with heatshrink is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30610-FT1 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle SMA connection on one end and right angle N connection on the other. This right angle SMA to right angle N cable from L-com has a male to male gender combination. Our SMA male to N male coaxial assembly part number LCCA30610-FT1 can also be known as right angle SMA plug to right angle N plug cable assembly when using alternate gender names. SMA plug to N plug cable assembly LCCA30610-FT1 is manufactured with a formable coax. These formable SMA to N cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded SMA male right angle to N male right angle cable assembly using LC085TBJ coax, 1 FT with heatshrink is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to N M/M cables is 10 GHz. Technical performance specifications on these 10 GHz SMA right angle male to N right angle male cables are located on the LCCA30610-FT1 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle N male to right angle SMA male cable assembly because it can be used in the opposite direction.SMA male right angle to N male right angle cable assembly using LC085TBJ coax, 1 FT with heatshrink is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle SMA to right angle N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA male right angle to N male right angle cable assembly using LC085TBJ coax, 1 FT with heatshrink.
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.