Produktdetails
Beige FAKRA Buchse zu SMA männlich Kabel Using RG316 Coax
Teilenummer (MPN)
Impedanz
50
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Impedanz | 50 |
|---|---|
| Impedanz | 50 |
| Impedanz | 50 |
| Steckverbinder Serie 1 | SMA |
| Steckverbinder Geschlecht 1 | männlich |
| Steckverbinder Polarität 1 | Standard |
| Steckverbinder Winkel 1 | Gerade |
| Steckverbinder Montage Method 1 | None |
| Steckverbinder Serie 2 | FAKRA |
| Steckverbinder Geschlecht 2 | Buchse |
| Steckverbinder Polarität 2 | Standard |
| Steckverbinder Winkel 2 | Gerade |
Show 5 more specs
| Steckverbinder Montage Method 2 | None |
|---|---|
| RF Kabel Part Number | RG316/U |
| RF Kabel Typ | RG316 |
| Produkttyp | Kabelkonfektionen |
| Category | Kabelkonfektionen |
Beschreibung
Aktuelle Referenzdaten für PE39348I: 50. Die Impedanz ist als 50 angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
R302205003130
MML / Stecker H2.0 - SMA BULKHEAD Buchse Kabelkonfektion 1.13/50/S LGTH 130CM
FGA.0T.305.CYCC40
T - Small Outdoor keyed Serie Steckverbinder; configuration: crimp
AD-A3Q3
SMA Stecker zu QMA Stecker 6 GHz VSWR1.1 und 18 GHz VSWR1.25
X9000984-4GDRMB
RF Steckverbinder; configuration: RP-SMA männlich; frequency 790 MHz ~ 960 MHz, 1.71 GHz ~ 2.69 GHz
LCCA30379-FT1.5
L-com low loss SMA männlich zu SMA weiblich Kabelkonfektion using 100 Serie coax, 1.5 FT is available für same day shipping from our facility. This hoch quality SMA Kabel is part of a large selection of in-stock, commercial-off-the-shelf und custom-built koaxial Kabelkonfektion für RF / microwave that all ship the same business day as they are ordered. LCCA30379-FT1.5 SMA Kabel from L-com are a great choice für solutions requiring hoch quality und rapid shipping. These hoch-quality RF coax Kabelkonfektion can be used für telecom, military / defense, laboratory test und measurement, industrial / commercial und many other applications. Our expert technical support und knowledgeable sales teams are ready zu help answer your RF koaxial Kabelkonfektion questions.These RF low loss koaxial Kabelkonfektion are built mit SMA connection on one end und SMA connection on the other. This low loss SMA zu SMA Kabel from L-com has a männlich zu weiblich Geschlecht combination. Our SMA männlich zu SMA weiblich koaxial Konfektion part number LCCA30379-FT1.5 can also be known as low loss SMA Stecker zu SMA Buchse Kabelkonfektion when using alternate Geschlecht names. SMA Stecker zu SMA Buchse Kabelkonfektion LCCA30379-FT1.5 is manufactured mit a flexible coax. These flexible SMA zu SMA Kabelkonfektion use 100 Serie coax (CA-100 flexible) und are double geschirmt. L-com double geschirmt low loss SMA männlich zu SMA weiblich Kabelkonfektion using 100 Serie coax, 1.5 FT is built from quality components by skilled assemblers mit many years of experience.Maximum frequency für these SMA zu SMA M/F Kabel is 6 GHz. Technical performance specifications on these 6 GHz SMA männlich zu SMA weiblich Kabel are located on the LCCA30379-FT1.5 datasheet PDF along mit CAD drawing und dimensions. The L-Com RF Kabelkonfektion data sheet mit specs, drawing dimensions can be found on this product page just above. Our Custom Kabel Configurator is where zu find und build customized versions of this RF koaxial Konfektion or many other Steckverbinder und coax combinations that all ship the same-day. This product can also be called a low loss SMA weiblich zu SMA männlich Kabelkonfektion because it can be used in the opposite direction.Low loss SMA männlich zu SMA weiblich Kabelkonfektion using 100 Serie coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf und custom versions of our SMA zu SMA Kabelkonfektion available für same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons und more, L-com should be your number one source für wired und wireless connectivity products like our low loss SMA männlich zu SMA weiblich Kabelkonfektion using 100 Serie coax, 1.5 FT.
LCCA30038-FT4
L-com low loss SMA männlich zu N weiblich bulkhead Kabelkonfektion mit heavy duty heat shrink boot using LL335i coax, 4 FT is available für same day shipping from our facility. This hoch quality SMA Kabel is part of a large selection of in-stock, commercial-off-the-shelf und custom-built koaxial Kabelkonfektion für RF / microwave that all ship the same business day as they are ordered. LCCA30038-FT4 SMA Kabel from L-com are a great choice für solutions requiring hoch quality und rapid shipping. These hoch-quality RF coax Kabelkonfektion can be used für telecom, military / defense, laboratory test und measurement, industrial / commercial und many other applications. Our expert technical support und knowledgeable sales teams are ready zu help answer your RF koaxial Kabelkonfektion questions.These RF low loss koaxial Kabelkonfektion are built mit SMA connection on one end und N bulkhead connection on the other. This low loss SMA zu N Kabel from L-com has a männlich zu weiblich Geschlecht combination. Our SMA männlich zu N weiblich koaxial Konfektion part number LCCA30038-FT4 can also be known as low loss SMA Stecker zu N Buchse Kabelkonfektion when using alternate Geschlecht names. SMA Stecker zu N Buchse Kabelkonfektion LCCA30038-FT4 is manufactured mit a flexible coax. These flexible SMA zu N Kabelkonfektion use LL335i coax und are triple geschirmt. L-com triple geschirmt low loss SMA männlich zu N weiblich bulkhead Kabelkonfektion mit heavy duty heat shrink boot using LL335i coax, 4 FT is built from quality components by skilled assemblers mit many years of experience.Maximum frequency für these SMA zu N M/F Kabel is 18 GHz. Technical performance specifications on these 18 GHz SMA männlich zu N weiblich bulkhead Kabel are located on the LCCA30038-FT4 datasheet PDF along mit CAD drawing und dimensions. The L-Com RF Kabelkonfektion data sheet mit specs, drawing dimensions can be found on this product page just above. Our Custom Kabel Configurator is where zu find und build customized versions of this RF koaxial Konfektion or many other Steckverbinder und coax combinations that all ship the same-day. This product can also be called a low loss N weiblich bulkhead zu SMA männlich Kabelkonfektion because it can be used in the opposite direction.Low loss SMA männlich zu N weiblich bulkhead Kabelkonfektion mit heavy duty heat shrink boot using LL335i coax, 4 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf und custom versions of our SMA zu N Kabelkonfektion available für same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons und more, L-com should be your number one source für wired und wireless connectivity products like our low loss SMA männlich zu N weiblich bulkhead Kabelkonfektion mit heavy duty heat shrink boot using LL335i coax, 4 FT.
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.