Produktdetails
The NP-142A is an N Straight Plug connector, designed for coaxial cables. This connector is suitable for various high-frequency applications.Fits RG-142B/U cables. It features a impedance 50Ω, operates up to 10 GHz, and has a rated voltage of AC 500V, ensures a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.). Withstanding temperatures from -40 to +85°C. The contact is made of Brass/Gold-Plated/Soldered, while the body is Brass/Nickel Plating/Crimp.A crimping toolTA-34 or TA-35 is required for mounting. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.
Teilenummer (MPN)
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Schnittstelle | N Plug |
|---|---|
| IP-Schutzart | {'text': "The NP-142A is an N Straight Plug connector, designed for coaxial cables. This connector is suitable for various high-frequency applications.Fits RG-142B/U cables. It features a impedance 50Ω, operates up to 10 GHz, and has a rated voltage of AC 500V, ensures a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.). Withstanding temperatures from -40 to +85°C. The contact is made of Brass/Gold-Plated/Soldered, while the body is Brass/Nickel Plating/Crimp.A crimping toolTA-34 or TA-35 is required for mounting. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging."} |
| Specifications | {'Cable type': 'RG-142B/U', 'Connector Gender': 'Plug', 'Impedance (Ohms)': '50Ω', 'Rated Voltage AC': 'AC 500V', 'Operating Frequency Range': '10 GHz', 'Insulation Resistance': '1000MΩ(Min.) at DC 500V', 'Withstand Voltage': 'AC 1000V(1 minute)', 'Contact Resistance': '3 mΩ(Max.)', 'Operating Temperature Range': '-40 to +85°C', 'Crimping Tool': 'TA-34, TA-35'} |
| Material/Plating/Attachment | {'Contact': 'Brass/Gold-Plated/Soldered', 'Body': 'Brass/Nickel Plating/Crimp'} |
| Category | N Plug |
| Product Features | 50Ω; Plug; RoHS2; Small lot order available |
Beschreibung
Für NP-142A ist eine Referenz-MPN angegeben; die endgültige Bestätigung hängt von Zeichnung, Spezifikation oder BOM ab. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Das Material ist als {'Contact': 'Brass/Gold-Plated/Soldered', 'Body': 'Brass/Nickel Plating/Crimp'} angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
T3262-100
Circular DIN Steckverbinder männlich Buchse 3 WAY
C091 31H012 202 5 U
Circular DIN Steckverbinder männlich Kabel Steckverbinder, Quicklock, Größe M16, 12 Kontakte, Gold Kontakt Plating, Kabel Diameter 8.5-10.5 mm,
SMD8FRA011
DIN Steckverbinder
LCCA30198-FT2
L-com's LCCA30198-FT2 is a low loss 7/16 DIN male to 7/16 DIN male cable assembly using LMR-400-DB coax, 2 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30198-FT2 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Cable Assembly using LMR-400-DB Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
L777TWB17W2PA514
D-Sub-Steckverbinder mit Mischkontakten D-SUB, Machined Hybrid, 17W2, Signal (7.5A) Kontakte Only, Kontakt, Soldercup Kabel Montage, Bright Zinn Shell+Grounding Dimples, 0.76 m (30 in) Signal, Blind Mate Guide Kontakt
FMCA1914
Plenum Low PIM 7/16 DIN Female to RA N Male Cable SPP-250-LLPL Coax Using Times Microwave Parts
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.