CSTONE
RFQ-Liste

Produktdetails

L-com's LCCA30255-FT2 is a low loss SMA male to N male cable assembly using LMR-240 coax, 2 FT with Times Microwave components and ships same-day. The LMR-240 coax of this SMA cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to N cable assembly has a male to male gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30255-FT2 L-com Low Loss SMA Male to N Male Cable Assembly using LMR-240 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

Kompatible Alternative aus China — die Passung bestätigen wir anhand Ihrer Zeichnung/Spezifikation.

Teilenummer (MPN)

LCCA30255-FT2

Impedanz

50 Ohm

Schnittstelle

SMA

kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing

Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.

RF-Kabel nach Zeichnung →
WhatsApp — Schnelle Antwort
Lieferzeit: 3–6 Wo. | MOQ: 200+ Stk.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort.
  • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
  • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
  • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.

Bild

Zum Vergrößern klicken.

Produktbild

LCCA30255-FT2 product photo

LCCA30255-FT2 product photo

Specifications

Specifications for LCCA30255-FT2
SchnittstelleCoaxial Cable Assemblies
SchnittstelleLMR-240
SchnittstelleSMA
SchnittstelleN
Impedanz50 Ohm
Impedanz50 Ohm
Impedanz50 Ohm
GeschlechtMale
GeschlechtMale
AusrichtungStraight
AusrichtungStraight
Connector 1 Body MaterialPassivated Stainless Steel
Show 4 more specs
Connector 1 PolarityStandard
Connector 2 PolarityStandard
KabeltypLMR-240
CategoryCoaxial Cable Assemblies

Beschreibung

Aktuelle Referenzdaten für LCCA30255-FT2: SMA · 50 Ohm · Straight. Der Katalog listet die Konfiguration als: Straight. Die Impedanz ist als 50 Ohm angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Das Material ist als Passivated Stainless Steel angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.

Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.

Ähnliche Steckverbinder

Diese Modelle könnten ebenfalls interessant sein:

73251-0200

RF-Steckverbinder / Koaxial-Steckverbinder Buchse SMA Buchse MA Buchse Flg .012 Kontakt

Details anzeigen →

SMA8400M9B-0000-27

SMA jack PCB mount end launch (T=2.15) with round contact (Φ0.18); 26.5GHz VSWR1.3

Details anzeigen →

R125174000W

RF-Steckverbinder / Koaxial-Steckverbinder SMA abgewinkelt Stecker crimp Typ Kabel 2.6/50 D

Details anzeigen →

1-core (Single) OM2 LC-FC

This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a 1-core (Single) cable, multimode (OM2), with LC-FC connectors.Example model: TFC-1C-OM2-LC-FC-1mYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.

Details anzeigen →

132147-44

SMA Panel Mount Jack 2-Hole Flange 50 Ohm

Details anzeigen →

2-core (Zipcord) SM LC-ST

This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a 2-core (Zipcord) cable, single-mode (SM), with LC-ST connectors.Example model: TFC-2C-SM-LC-ST-1mYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.

Details anzeigen →
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer.

Unterstützt exakte, Präfix- und Teiltreffer.

Haftungsausschluss

Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Cstone Technology ist ein in China ansässiger Export-Beschaffungspartner für kompatible Alternativen und steht in keiner Verbindung zu den Originalmarken. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.