Produktdetails
L-com's LCCA30188-FT2 is a low loss 7/16 DIN male to 7/16 DIN male right angle cable assembly using LMR-400 coax, 2 FT with Times Microwave components and ships same-day. The LMR-400 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle 7/16 DIN cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30188-FT2 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Assembly using LMR-400 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Teilenummer (MPN)
Impedanz
50 Ohm
Schnittstelle
7/16 DIN
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Schnittstelle | Coaxial Cable Assemblies |
|---|---|
| Schnittstelle | LMR-400 |
| Schnittstelle | 7/16 DIN |
| Schnittstelle | 7/16 DIN |
| Impedanz | 50 Ohm |
| Impedanz | 50 Ohm |
| Impedanz | 50 Ohm |
| Geschlecht | Male |
| Geschlecht | Male |
| Ausrichtung | Straight |
| Ausrichtung | Right Angle |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Kabeltyp | LMR-400 |
| Category | Coaxial Cable Assemblies |
Beschreibung
Aktuelle Referenzdaten für LCCA30188-FT2: 7/16 DIN · 50 Ohm · Straight. Der Katalog listet die Konfiguration als: Straight. Die Impedanz ist als 50 Ohm angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Das Material ist als Brass angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
C091-31H107-101-2
Circular DIN Steckverbinder männlich CABEL Steckverbinder 7 WAY
557T071NF232
D-Sub-Rückenschalen SLD BANDING BS TOP
7/16J-HNJ
The 7/16J-HNJ is an In/Between Series Adaptors . This connector is suitable for various high-frequency applications. It features a impedance 50Ω. The contact is made of Phosphor Bronze/Ag Plating, while the body is Brass/Tri‐Alloy Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
PE3C6251
Plenum 7/16 DIN Male to NEX10 Male Low PIM Cable Using SPP-250-LLPL Coax Using Times Microwave Parts
LCCA30334-FT10
L-com's LCCA30334-FT10 is a low loss N male to 7/16 DIN male cable assembly using LMR-600 coax, 10 FT with Times Microwave components and ships same-day. The LMR-600 coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30334-FT10 L-com Low Loss N Male to 7/16 DIN Male Cable Assembly using LMR-600 Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
C091-11K107-000-2
Circular DIN Steckverbinder männlich Kabel Steckverbinder 7 WAY abgewinkelt
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.