CSTONE
RFQ-Liste

Produktdetails

L-com Cable Assembly LCCA30005 is an N male to SMA male 1 foot cable using 402SS Series coax that ships same-day. L-com's flexible RF cable assemblies are ideal for applications where tight bends and flexure are required. This L-com N to SMA cable assembly has a male to male gender configuration with 50 ohm flexible 402SS Series coax and operates to 18 GHz. Highly durable stainless-steel connectors and heavy-duty booting extend the life of this versatile flexible cable assembly. The double shield includes a silver plated copper braid over a silver plated copper spiral strip providing excellent shielding effectiveness greater than 110 dB. Custom versions of this cable assembly along with the rest of L-com's RF cable assemblies can be built and shipped same day. Other available RF cable assembly value added services include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for custom cable quotes.

Kompatible Alternative aus China — die Passung bestätigen wir anhand Ihrer Zeichnung/Spezifikation.

Teilenummer (MPN)

LCCA30005-FT1

Impedanz

50 Ohm

Schnittstelle

N

kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing

Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.

RF-Kabel nach Zeichnung →
WhatsApp — Schnelle Antwort
Lieferzeit: 3–6 Wo. | MOQ: 200+ Stk.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort.
  • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
  • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
  • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.

Bild

Zum Vergrößern klicken.

Produktbild

LCCA30005-FT1 product photo

LCCA30005-FT1 product photo

Specifications

Specifications for LCCA30005-FT1
SchnittstelleCoaxial Cable Assemblies
Schnittstelle402SS Series
SchnittstelleN
SchnittstelleSMA
Impedanz50 Ohm
Impedanz50 Ohm
Impedanz50 Ohm
GeschlechtMale
GeschlechtMale
AusrichtungStraight
AusrichtungStraight
Connector 1 Body MaterialBrass
Show 7 more specs
Connector 1 Body PlatingNickel
Connector 1 PolarityStandard
Connector 2 PolarityStandard
KabeltypLCBC3001
CategoryCoaxial Cable Assemblies
ApplicationAutomated (ATE) Test Systems; Flexible RF Interconnect; General Purpose; Laboratory Use
Product FeaturesFlexible Alternative to .141 Semi-Rigid; Heavy Duty Heat Shrink Strain Relief Boot; 70% VOP; Precision Stainless Steel Connectors; Wire Braid over Spiral Strip Shield with FEP Jacket

Beschreibung

Aktuelle Referenzdaten für LCCA30005-FT1: N · 50 Ohm · Straight. Der Katalog listet die Konfiguration als: Straight. Die Impedanz ist als 50 Ohm angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Das Material ist als Brass angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.

Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.

Ähnliche Steckverbinder

Diese Modelle könnten ebenfalls interessant sein:

SMA8105-0142

SMA jack crimp bulkhead, IP67 mated, for RG142,RG400; 9GHz VSWR1.25

Details anzeigen →

PE3W17324

SMA Female Bulkhead to MCX Plug Cable Using RG316 Coax

Details anzeigen →

LCCA30294-FT2

L-com's LCCA30294-FT2 is a low loss TNC male right angle to SMA male cable assembly using LMR-400 coax, 2 FT with Times Microwave components and ships same-day. The LMR-400 coax of this TNC cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com TNC to SMA cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this TNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this TNC male to TNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30294-FT2 L-com Low Loss TNC Male Right Angle to SMA Male Cable Assembly using LMR-400 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

Details anzeigen →

142-9403-011

RF-Steckverbinder / Koaxial-Steckverbinder SMA ST Stecker 316 174

Details anzeigen →

9409-1113-000

SMA / gerade Stecker Buchse männlich Gold CAPTIVE Kontakt

Details anzeigen →

5919-9503-000

SMA / SMA abgewinkelt Buchse/Stecker weiblich/männlich PASSIVATED

Details anzeigen →
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer.

Unterstützt exakte, Präfix- und Teiltreffer.

Haftungsausschluss

Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.