CSTONE
RFQ-Liste

Produktdetails

High quality fully tested 7/16 DIN Male to 7/16 DIN Male cable assemblies featuring high performance 600-Series coax cable. These coax cables have excellent low loss characteristics. Not exactly what you are looking for? Build your own cable assembly with our Custom Product Configurator.

Kompatible Alternative aus China — die Passung bestätigen wir anhand Ihrer Zeichnung/Spezifikation.

Teilenummer (MPN)

CA-6DMDM050

Impedanz

50 Ohm

Schnittstelle

7/16 DIN

kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing

Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.

RF-Kabel nach Zeichnung →
WhatsApp — Schnelle Antwort
Lieferzeit: 3–6 Wo. | MOQ: 200+ Stk.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort.
  • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
  • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
  • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.

Bild

Zum Vergrößern klicken.

Produktbild

CA-6DMDM050 product photo

CA-6DMDM050 product photo

1 / 2

Specifications

Specifications for CA-6DMDM050
SchnittstelleCoaxial Cable Assemblies
Schnittstelle600 Series
Schnittstelle7/16 DIN
Schnittstelle7/16 DIN
Impedanz50 Ohm
Impedanz50 Ohm
Impedanz50 Ohm
GeschlechtMale
GeschlechtMale
AusrichtungStraight
AusrichtungStraight
Connector 1 PolarityStandard
Show 4 more specs
Connector 2 PolarityStandard
CategoryCoaxial Cable Assemblies
ApplicationAntenna Cable; RF Voice/Video/Data; Wireless Infrastructure; Wireless LAN Devices
Product FeaturesEach assembly is fully tested ensuring the highest quality; Excellent low loss characteristics; Custom cable lengths available; Features 7/16 DIN Male to 7/16 DIN Male connectors; Made with high performance, high quality 600-series coax cable

Beschreibung

Aktuelle Referenzdaten für CA-6DMDM050: 7/16 DIN · 50 Ohm · Straight. Der Katalog listet die Konfiguration als: Straight. Die Impedanz ist als 50 Ohm angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.

Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.

Ähnliche Steckverbinder

Diese Modelle könnten ebenfalls interessant sein:

CA4NMLPNF020

The CA4NMLPNF series are high performance low loss 400-series cable assemblies that feature a N-Male connector to an in-line N-Female Bulkhead gas discharge tube lightning protector attached directly to the cable. This not only reduces the cost since a connector is eliminated, but helps reduce return loss and insertion loss. These cable assemblies feature L-com's CA-400 which is a UV resistant polyethylene jacketed high performance flexible low loss coaxial cable. Attached directly to the cable is L-com's AL6-NF-14-9 5.8 GHz coaxial lightning protector. With a replaceable gas tube element, multi-strike capability and fast response time, they are suitable for a wide range of applications. A ground lug and terminal is provided directly on the lightning protector housing, which provides superior grounding. Custom lengths and connectors are also available. Contact L-com sales for more information. For additional information and complete specification, please see the data sheet in the Downloads section. Note: The lightning protector can also be purchased separately, see AL6-NF-14-9.

Details anzeigen →

LMR-LW600-LC-BULK

LMR-LW600-LC-BULK coax cable from L-com is only one of a large number of radio frequency coaxial cable types specifically stocked to be ready for quick shipment. L-com LMR-LW600-LC-BULK coax cable is manufactured in a flexible design and has a 50 Ohm impedance. This low loss flexible 50 Ohm coax cable LMR-LW600-LC-BULK is constructed with a 0.590 inch diameter and Black PE jacket. LMR-LW600-LC-BULK flexible 50 Ohm coax cable with PVC jacket is rated for a 8 GHz maximum operating frequency. This 50 Ohm 0.590 inch diameter and low loss flexible coax cable is built with a double shield count and RF shielding of 90 dB. L-com LMR-LW600-LC-BULK coax is constructed with Foam PE dielectric and a maximum operating temperature of +85 degrees C. Times Microwave LMR-LW600-LC-BULK coax cable specs for this wire properties can be found on its RF coax cable LMR-LW600-LC-BULK datasheet. LMR-LW600-LC-BULK cable is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-LW600-LC-BULK coax cable is ready to buy and can be shipped worldwide. L-com also maintains a wide selection of other radio frequency coaxial cable types that ship same-day from our warehouse as with the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.

Details anzeigen →

CA-6DMNM100

High quality fully tested 7/16 DIN Male to Type N-Male cable assemblies featuring high performance 600-Series coax cable. These coax cables have excellent low loss characteristics. Not exactly what you are looking for? Build your own cable assembly with our Custom Product Configurator.

Details anzeigen →

PE35965LF

N Male to 7/16 DIN Male Cable Using PE-SR402FL Coax

Details anzeigen →

NCA-PJ-6

The NCA-PJ-6 is an N75Ω Attenuator. This connector is suitable for various high-frequency applications. It features a impedance 75Ω, operates up to 2 GHz, and an excellent V.S.W.R 1.2(Max.) at DC~2GHz. The contact is made of Brass/Phosphor Bronze/Gold Plating, while the body is Brass/Nickel Plating. Rated Power is 1W.Attenuation is 6±0.8dB up to 2GHz. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.

Details anzeigen →

LC3MSA00225-60

The L-com LC3MSA00225-60 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to blunt cut cable assembly is plug to blunt cut and made of 78 ohm flexible TWCH-78-2-LC twinax. Our 78 Ohm cable assembly is available with a HF POF jacket and a copper inner conductor with silver plating. We offer a blue, 0.57-inch OD TRB 3-slot to blunt cut cable that operates at 500 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00225-60 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 3-slot plug to blunt cut cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible TWCH-78-2-LC twinax cable operates between -30 and 80 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to blunt cut cable as per your requirements.

Details anzeigen →
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer.

Unterstützt exakte, Präfix- und Teiltreffer.

Haftungsausschluss

Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.