CSTONE
RFQ-Liste

Produktdetails

hoch quality fully tested 7/16 DIN männlich zu 7/16 DIN weiblich Kabelkonfektion featuring hoch performance 600-Series coax Kabel. These coax Kabel have excellent low loss characteristics. Not exactly what you are looking für? Build your own Kabelkonfektion mit our Custom Product Configurator.

Kompatible Alternative aus China — die Passung bestätigen wir anhand Ihrer Zeichnung/Spezifikation.

Teilenummer (MPN)

CA-6DMDF050

Impedanz

50 Ohm

kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing

Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.

RF-Kabel nach Zeichnung →
WhatsApp — Schnelle Antwort
Lieferzeit: 3–6 Wo. | MOQ: 200+ Stk.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
  • • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
  • • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
  • • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.

Bild

Zum Vergrößern klicken.

Produktbild

CA-6DMDF050 product photo

CA-6DMDF050 product photo

1 / 3

Specifications

Specifications for CA-6DMDF050
Impedanz50 Ohm
Impedanz50 Ohm
Impedanz50 Ohm
Steckverbinder 1 Serie7/16 DIN
Steckverbinder 1 Geschlechtmännlich
Steckverbinder 1 PolaritätStandard
Steckverbinder Winkel 1Gerade
Steckverbinder 2 Serie7/16 DIN
Steckverbinder 2 Geschlechtweiblich
Steckverbinder 2 PolaritätStandard
Steckverbinder Winkel 2Gerade
RF Kabel Typ600 Serie
Show 4 more specs
Produkttypkoaxial Kabelkonfektion
Categorykoaxial Kabelkonfektion
ApplicationAntenna Kabel
Product FeaturesEach Konfektion is fully tested ensuring the highest quality

Beschreibung

Aktuelle Referenzdaten für CA-6DMDF050: 50 Ohm. Die Impedanz ist als 50 Ohm angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.

Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.

Ähnliche Steckverbinder

Diese Modelle könnten ebenfalls interessant sein:

LCCA30222-FT2

L-com's LCCA30222-FT2 is a low loss N männlich zu N weiblich bulkhead Kabelkonfektion using LMR-600-DB coax, 2 FT mit Times Microwave components und ships same-day. The LMR-600-DB coax of this N Kabel uses the PE (F) dielectric mit a VoP of 87%, resulting in very low insertion loss compared zu solid dielectrics. These flexible RF Kabelkonfektion are ideal für applications where flexure is required. Our L-com N zu N Kabelkonfektion has a männlich zu weiblich Geschlecht configuration mit flexible LMR-600-DB Serie coax und operates zu 5.8 GHz. The double shield of this N Kabel is layered by tinned Kupfer braid over Aluminium tape providing shielding effectiveness greater than 90dB. L-com's RF Kabelkonfektion mit N bulkhead interface enables system designers zu have external connections on their product enclosures or zu be used für other rack Montage und Panelmontage applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N männlich zu N weiblich Kabel, along mit the rest of L-com's other RF Konfektionen, can also be built und shipped same day. Other available RF Kabelkonfektion value added services from L-com include Steckverbinder orientation or clocking, heat shrink booting und custom labeling. RF testing can also be performed zu document the electrical performance of your Kabelkonfektion. Kontakt a sales representative für testing or custom RF Kabel quotes. Part number LCCA30222-FT2 L-com Low Loss N männlich zu N weiblich Bulkhead Kabelkonfektion using LMR-600-DB Coax, 2 FT mit Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) und dimensions below.

Details anzeigen →

LMR-500-UF-LC-BULK

LMR-500-UF-LC-BULK coax Kabel from L-com is only one of a large number of radio frequency koaxial Kabel types specifically stocked zu be ready für quick shipment. L-com LMR-500-UF-LC-BULK coax Kabel is manufactured in a flexible design und has a 50 Ω impedance. This low loss flexible 50 Ω coax Kabel LMR-500-UF-LC-BULK is constructed mit a 0.500 inch diameter und Black TPE jacket. LMR-500-UF-LC-BULK flexible 50 Ω coax Kabel mit PVC jacket is rated für a 8 GHz maximum operating frequency. This 50 Ω 0.500 inch diameter und low loss flexible coax Kabel is built mit a double shield Anzahl und RF shielding of 90 dB. L-com LMR-500-UF-LC-BULK coax is constructed mit Foam PE dielectric und a maximum operating temperature of +85 degrees C. Times Microwave LMR-500-UF-LC-BULK coax Kabel specs für this wire properties can be found on its RF coax Kabel LMR-500-UF-LC-BULK datasheet. LMR-500-UF-LC-BULK Kabel is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-500-UF-LC-BULK coax Kabel is ready zu buy und can be shipped worldwide. L-com also maintains a wide selection of other radio frequency koaxial Kabel types that ship same-day from our warehouse as mit the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.

Details anzeigen →

LC3CA2219-36

The L-com LC3CA2219-48 MIL-STD-1553 flexible RF Kabelkonfektion is perfect für applications that need tight bends und flexible Kabel. This TRB 3-slot zu blunt cut Kabelkonfektion is Stecker zu blunt cut und made of 78 Ω flexible 30-02001-LC twinax. Our 78 Ω Kabelkonfektion is available mit a PVC jacket und a Kupfer inner conductor mit Silber plating. We offer a blue, 0.57-inch OD TRB 3-slot zu blunt cut Kabel that operates at 400 MHz.This blue RF Kabelkonfektion is the most commonly utilized Kabelkonfektion in wide connectivity applications such as bus couplers, avionics control boxes, und bus relay. L-com's LC3CA2219-48 MIL-STD-1553 flexible RF Kabelkonfektion is available mit PE dielectric. Our TRB 3-slot Stecker zu blunt cut Kabel has bayonet coupling Steckverbinder made of Messing mit Nickel plating. This RF flexible 30-02001-LC twinax Kabel operates between -20 und 75 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF Kabelkonfektion mit same-day shipment für domestic und international orders. We are a global leader of wired und wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, und telecommunication. für further information on similar products, our expert technical support und trained sales team can get you the perfect TRB 3-slot Stecker zu blunt cut Kabel as per your requirements.

Details anzeigen →

L717SDAH15POL2VFC309

D-Sub-Standard-Steckverbinder D-SUB, Stamped Signal 3A, gerade PCB Durchsteckmontage, Back Insulator Plus Back Shell Height 6.0 mm, 15 Kontakt, 0.76 m (30 in) Gold, Bright Zinn Shell+Grounding Dimples, 4-40 Fixed Front Screwlock, ohne Standoff und Boardlock

Details anzeigen →

SD3090

Inner DC Block From 380 MHz to 2.7 GHz With 7/16 DIN Connectors

Details anzeigen →

85184486

MINI250™H is for payload integration cabling, helping transmit antenna signals while providing the ability to complete long runs between cable subsystems. It is a significant step-function and low-loss leader in the mold of the MINI141™H cable.

Details anzeigen →
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄

Unterstützt exakte, Präfix- und Teiltreffer.

Haftungsausschluss

Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.