Produktdetails
The BNC-PC is a BNC receptacle for a printed circuit board connector. This connector is suitable for various high-frequency applications. It features an impedance of 50 Ω, operates up to 4 GHz, and has a rated voltage of AC 500V, ensuring a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.). Withstanding temperatures from -40 to +85°C. The contact is made of Phosphor Bronze/Gold Plating, while the body is Brass/Nickel Plating. Terminal Shape is edge mount. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.Learn more about the BNC 50Ω RF connector in our technical guide.
Teilenummer (MPN)
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Schnittstelle | BNC Receptacle(PCB) |
|---|---|
| IP-Schutzart | {'text': "The BNC-PC is a BNC receptacle for a printed circuit board connector. This connector is suitable for various high-frequency applications. It features an impedance of 50 Ω, operates up to 4 GHz, and has a rated voltage of AC 500V, ensuring a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.). Withstanding temperatures from -40 to +85°C. The contact is made of Phosphor Bronze/Gold Plating, while the body is Brass/Nickel Plating. Terminal Shape is edge mount. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.Learn more about the BNC 50Ω RF connector in our technical guide."} |
| Specifications | {'Connector Gender': 'Jack', 'Impedance (Ohms)': '50Ω', 'Rated Voltage AC': 'AC 500V', 'Operating Frequency Range': '4 GHz', 'Insulation Resistance': '1000MΩ(Min.) at DC 500V', 'Withstand Voltage': 'AC 1500V(1 minute)', 'Contact Resistance': '3 mΩ(Max.)', 'Operating Temperature Range': '-40 to +85°C', 'Terminal Shape': 'edge mount'} |
| Material/Plating/Attachment | {'Contact': 'Phosphor Bronze/Gold Plating', 'Body': 'Brass/Nickel Plating'} |
| Category | BNC Receptacle(PCB) |
| Product Features | 50Ω; Made to order product; Receptacle(PCB); RoHS2 |
Beschreibung
Für BNC-PC ist eine Referenz-MPN angegeben; die endgültige Bestätigung hängt von Zeichnung, Spezifikation oder BOM ab. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Das Material ist als {'Contact': 'Phosphor Bronze/Gold Plating', 'Body': 'Brass/Nickel Plating'} angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
BNC Plug to Jack(Flange) Cable Using RG-58A/U Coax
This BNC series cable assembly features an RG-58A/U coaxial cable with a BNC straight plug (male) to a BNC flange jack (female). It maintains a 50 Ω impedance. Please contact us via the "Contact" page with your required length and quantity.Learn more about the BNC 50 Ω RF connector in our technical guide.
4043
RF-Adapter zwischen Serien BNC zu 1/4" PHONE
PE3W05925
TNC Male to BNC Male Low Loss Cable Using LMR-195 Coax
AD-NJHDBNCJ-1
HD-BNC Jack to N-Type Jack Adapter 75 Ohm Straight
LCCA30324-FT5
L-com's LCCA30324-FT5 is a low loss BNC male to TNC male right angle cable assembly using LMR-400-DB coax, 5 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this BNC cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com BNC to TNC cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this BNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-400-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this BNC male to BNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30324-FT5 L-com Low Loss BNC Male to TNC Male Right Angle Cable Assembly using LMR-400-DB Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
112961
RF-Steckverbinder / Koaxial-Steckverbinder BNC abgewinkelt crimp Stecker 734A/U 75 Ω BR-TF
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Cstone Technology ist ein in China ansässiger Export-Beschaffungspartner für kompatible Alternativen und steht in keiner Verbindung zu den Originalmarken. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.