Produktdetails
SMA gerade lötbar Stecker 0.085-inch Conformable 0.086-inch Conformable RG-405 50 Ω Anti Torque
Teilenummer (MPN)
Impedanz
50
Frequenz
34
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Gehäuseoberfläche | Gold |
|---|---|
| Gehäusematerial | Messing |
| Kabel Typ (Terminates zu) | 0.085-inch Semi-Rigid, 0.086-inch Semi-Rigid, 0.085-inch Conformable, 0.086-inch Conformable, RG-405, Times Tflex 405, Belden 1671A |
| Kontaktoberfläche | Gold |
| Kontaktmaterial | Berylliumkupfer |
| Kontaktanschluss | Lötbar |
| Kupplungsmechanismus | Threaded |
| Exportkontroll-Klassifizierungsnummer | EAR99 |
| Frequenz (max) | 34 |
| Geschlecht | Stecker |
| IP-Schutzart | Not Rated |
| Impedanz | 50 |
Show 13 more specs
| Isolator-Material | PTFE |
|---|---|
| Isoliert | Nein |
| Niedriger PIM | Nein |
| MIL-qualifiziert | Not Mil Qualified |
| Nicht magnetisch | Nein |
| Ausrichtung | Gerade |
| Montage | Nicht zutreffend |
| Anzahl Ports | 1 (Single Port) |
| Größe Category | Subminiature |
| Temp. (max °C) | 165 |
| Temp. (min °C) | -65 |
| Anschlussart | Kabel - lötbar |
| Gewinderichtung | Standard |
Beschreibung
Aktuelle Referenzdaten für 901-10709: 50 · 34 · Nicht zutreffend. Die Impedanz ist als 50 angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Die Frequenz ist als 34 angegeben. Die reale Betriebsgrenze hängt weiterhin von Baugruppe, Gegenstück und Einsatzumfeld ab. Für Hochfrequenzprojekte senden Sie Zeichnung, Kabelführung und kritische Anforderungen bereits im ersten RFQ. Die Montage ist als Nicht zutreffend angegeben. Wenn Panel-, Durchführungs- oder Flanschvorgaben wichtig sind, senden Sie die Maße mit dem RFQ. Das Material ist als Messing angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Der Katalog nennt außerdem einen Dichtungs- oder Schutzwert von Not Rated. Prüfen Sie diesen gegen die reale Umgebung im RFQ. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
142-5404-101
RF-Steckverbinder / Koaxial-Steckverbinder SMA Stecker Asmbly abgewinkelt Cbl LH Thread RG316
PE3C2035LF
SMA Male to BNC Male Cable Using RG188 Coax, LF Solder, RoHS
LCCA30175/WP-FT1
The L-com LCCA30175/WP-FT1 is a weatherproof low loss cable assembly that comes with SMA male connection with weatherproof boot on one end and SMA male with weatherproof boot on the other. L-com’s RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc. The low loss cable has a 50 Ohm impedance and is specifically ready for quicker shipment than most in the industry can provide.This weatherproof low loss RF cable assembly operates at a maximum frequency of 6 GHz. Our RF cable assembly has a PE jacket with 0.240 inches diameter. The SMA male to SMA male cable assembly LCCA30175/WP-FT1 is built with LMR-240 coax, which has a flexible design.This RF cable assembly with 0.5 inches diameter has copper as cable’s inner conducting material and PE (F) dielectric type. The weatherproof boot low loss cable is reusable and can withstand elements including extreme temperature. Additional dimensions, specifications, and CAD drawings for this LCCA30175/WP-FT1 low loss RF cable are available on our downloadable PDF datasheet.L-com stocks a wide selection of weatherproof low loss cable assemblies that ship the same business day as ordered from our warehouse. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal SMA male to SMA male cable assembly as per your requirements.
LCCA30009-FT4
L-com Cable Assembly LCCA30009 is an SMA male to N female bulkhead 4 feet cable using 402SS Series coax that ships same-day. L-com's flexible RF cable assemblies are ideal for applications where tight bends and flexure are required. This L-com SMA to N cable assembly has a male to female gender configuration with 50 ohm flexible 402SS Series coax and operates to 18 GHz. Highly durable stainless-steel connectors and heavy-duty booting extend the life of this versatile flexible cable assembly. The double shield includes a silver plated copper braid over a silver plated copper spiral strip providing excellent shielding effectiveness greater than 110 dB. Custom versions of this cable assembly along with the rest of L-com's RF cable assemblies can be built and shipped same day. Other available RF cable assembly value added services include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for custom cable quotes.
6801.19.A
Attenuators - Interconnects SMA plug(m) zu SMA jack(f), 1dB, 2W
72962
RF Steckverbinder koaxial Steckverbinder SMA Buchse Panel Buchse (4 HOLE)
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.