Produktdetails
2203550001 — RF Steckverbinder; configuration: SMA männlich
Teilenummer (MPN)
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Terminierung | SMA männlich |
|---|---|
| Application | 5G, LTE |
| Verpackung | Bulk |
| Montage | Steckverbinder Montage |
| Category | RF und Wireless/RF Antennas |
| Produkttyp | RF und Wireless/RF Antennas |
Beschreibung
Aktuelle Referenzdaten für 2203550001: SMA männlich. Der Katalog listet die Konfiguration als: SMA männlich. Wenn die Montage hier fehlt, bestätigen Sie sie aus der Zeichnung oder der Gegenstückanforderung. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
LCCA30031-FT4
L-com low loss SMA male right angle to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 4 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30031-FT4 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with right angle SMA connection on one end and right angle SMA connection on the other. This low lossright angle SMA to right angle SMA cable from L-com has a male to male gender combination. Our SMA male to SMA male coaxial assembly part number LCCA30031-FT4 can also be known as low loss right angle SMA plug to right angle SMA plug cable assembly when using alternate gender names. SMA plug to SMA plug cable assembly LCCA30031-FT4 is manufactured with a flexible coax. These flexible SMA to SMA cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss SMA male right angle to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 4 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to SMA M/M cables is 18 GHz. Technical performance specifications on these 18 GHz SMA right angle male to SMA right angle male cables are located on the LCCA30031-FT4 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day.Low loss SMA male right angle to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 4 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle SMA to right angle SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male right angle to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 4 FT.
ST0673
RP SMA männlich (Stecker) Termination (Load) 1 Watts zu 18 GHz, Tri-Metal plattiert Messing, 1.25 VSWR
CC174SB-1.5
L-com now offers 50 Ohm, SMA RG174/U coaxial cable assemblies with rugged molded strain relief boots that protect against severe cable bends at the cable/connector egress point. This new L-com exclusive RG174/U molded boot design is a hard to find feature that most coaxial cable manufacturers do not offer. This series employs an SMA connector on one end and a BNC connector on the other end. Additionally, L-com stocks 7 standard lengths from .5 to 10 ft ready for immediate delivery.
LCCA30604-FT1
L-com BNC female to SMA female bulkhead cable assembly using LC085TBJ coax, 1 FT is available for same day shipping from our facility. This high quality BNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30604-FT1 BNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with BNC connection on one end and SMA bulkhead connection on the other. This BNC to SMA cable from L-com has a female to female gender combination. Our BNC female to SMA female coaxial assembly part number LCCA30604-FT1 can also be known as BNC jack to SMA jack cable assembly when using alternate gender names. BNC jack to SMA jack cable assembly LCCA30604-FT1 is manufactured with a formable coax. These formable BNC to SMA cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded BNC female to SMA female bulkhead cable assembly using LC085TBJ coax, 1 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these BNC to SMA F/F cables is 1 GHz. Technical performance specifications on these 1 GHz BNC female to SMA female bulkhead cables are located on the LCCA30604-FT1 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA female bulkhead to BNC female cable assembly because it can be used in the opposite direction.BNC female to SMA female bulkhead cable assembly using LC085TBJ coax, 1 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our BNC to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our BNC female to SMA female bulkhead cable assembly using LC085TBJ coax, 1 FT.
A95B39-58-
SMA reverse polarity jack bulkhead IP67 mated to BNC plug right angle using RG58
135106-04-12.00
RF Cable Assemblies SMA St Jack to St Plug RG-58/U 12in
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.