Produktdetails
BNC abgewinkelt crimp Stecker RG-58 RG-141 Times LMR-195 50 Ω
Teilenummer (MPN)
Impedanz
50
Frequenz
4
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Alias | B1112A1-ND3G-58U-50 |
|---|---|
| Gehäuseoberfläche | Nickel |
| Gehäusematerial | Messing |
| Kabel Typ (Terminates zu) | RG-58, RG-141, Times LMR-195, Times LMR-200-LLPL, Belden 7806A, Belden 8219, Belden 8240, Belden 8259, Belden 8262, Belden 9201, Belden 9203, Belden 9310, Belden 9311 |
| Kontaktoberfläche | Gold |
| Kontaktmaterial | Messing |
| Kontaktanschluss | Lötbar |
| Kupplungsmechanismus | Bayonet |
| Terminierung | 47-10070 |
| Exportkontroll-Klassifizierungsnummer | EAR99 |
| Frequenz (max) | 4 |
| Geschlecht | Stecker |
Show 14 more specs
| IP-Schutzart | Not Rated |
|---|---|
| Impedanz | 50 |
| Isolator-Material | Delrin |
| Isoliert | Nein |
| Niedriger PIM | Nein |
| MIL-qualifiziert | Not Mil Qualified |
| Nicht magnetisch | Nein |
| Ausrichtung | Abgewinkelt |
| Montage | Nicht zutreffend |
| Anzahl Ports | 1 (Single Port) |
| Größe Category | Miniature |
| Temp. (max °C) | 85 |
| Temp. (min °C) | -40 |
| Anschlussart | Kabel - crimp |
Beschreibung
Aktuelle Referenzdaten für 112162: 50 · 4 · Nicht zutreffend. Der Katalog listet die Konfiguration als: 47-10070. Die Impedanz ist als 50 angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Die Frequenz ist als 4 angegeben. Die reale Betriebsgrenze hängt weiterhin von Baugruppe, Gegenstück und Einsatzumfeld ab. Die Montage ist als Nicht zutreffend angegeben. Wenn Panel-, Durchführungs- oder Flanschvorgaben wichtig sind, senden Sie die Maße mit dem RFQ. Das Material ist als Messing angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Der Katalog nennt außerdem einen Dichtungs- oder Schutzwert von Not Rated. Prüfen Sie diesen gegen die reale Umgebung im RFQ. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
LCCA30659-FT4
L-com BNC female to TNC male right angle cable assembly using LC085TBJ coax, 4 FT is available for same day shipping from our facility. This high quality BNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30659-FT4 BNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with BNC connection on one end and right angle TNC connection on the other. This BNC to right angle TNC cable from L-com has a female to male gender combination. Our BNC female to TNC male coaxial assembly part number LCCA30659-FT4 can also be known as BNC jack to right angle TNC plug cable assembly when using alternate gender names. BNC jack to TNC plug cable assembly LCCA30659-FT4 is manufactured with a formable coax. These formable BNC to TNC cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded BNC female to TNC male right angle cable assembly using LC085TBJ coax, 4 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these BNC to TNC F/M cables is 1 GHz. Technical performance specifications on these 1 GHz BNC female to TNC right angle male cables are located on the LCCA30659-FT4 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle TNC male to BNC female cable assembly because it can be used in the opposite direction.BNC female to TNC male right angle cable assembly using LC085TBJ coax, 4 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our BNC to right angle TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our BNC female to TNC male right angle cable assembly using LC085TBJ coax, 4 FT.
112954
RF-Steckverbinder / Koaxial-Steckverbinder BNC ST Stecker STD Kabel 75 Ω
031-5539-RFX
BNC Straight PCB Jack Through Hole Bulkhead Rear Mount 50 Ohm
LCCA30129-FT5
L-com BNC female to BNC female cable assembly using LC085TB coax, 5 FT is available for same day shipping from our facility. This high quality BNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30129-FT5 BNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with BNC connection on one end and BNC connection on the other. This BNC to BNC cable from L-com has a female to female gender combination. Our BNC female to BNC female coaxial assembly part number LCCA30129-FT5 can also be known as BNC jack to BNC jack cable assembly when using alternate gender names. BNC jack to BNC jack cable assembly LCCA30129-FT5 is manufactured with a formable coax.Maximum frequency for these BNC to BNC F/F cables is 20 GHz. Technical performance specifications on these 20 GHz BNC female to BNC female cables are located on the LCCA30129-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day.BNC female to BNC female cable assembly using LC085TB coax, 5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our BNC to BNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our BNC female to BNC female cable assembly using LC085TB coax, 5 FT.
4276-C-36
RF Kabelkonfektion BNC abgewinkelt
BNC Plug to Plug Cable Using RG-8/U Coax
This BNC series cable assembly features an RG-8/U cable with BNC straight plugs (male) on both ends. It maintains a 50 Ω impedance. Please contact us via the “Contact” page with your required length and quantity. Learn more about the BNC 50 Ω RF connector in our technical guide.
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Cstone ist eine professionelle Fabrik, kein Handelsunternehmen, für RF- und Koaxialsteckverbinder, Adapter und Kabelkonfektionen einschließlich N-Type, BNC, SMA, SMP, SSMB und MMCX. Wir fertigen Steckverbinder nach 2D-Zeichnungen oder Mustern; Passung, MOQ, Lieferzeit und Produktionsdetails werden per RFQ bestätigt. Cstone Technology ist nicht mit den Originalmarken verbunden. Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.