Produktdetails
BNC abgewinkelt PCB Buchse Durchsteckmontage Bulkhead Rear Montage 75 Ω Isolated
Teilenummer (MPN)
Impedanz
75
Frequenz
1
kundenspezifische RF-Kabelbaugruppe nach Zeichnung für Produktions-Sourcing
Produktionsorientierte kundenspezifische RF-Kabelbaugruppe nach Zeichnung mit Kompatibilitätsprüfung, MOQ-Führung und Cost-down-Sourcing-Unterstützung.
Was vor dem RFQ vorzubereiten ist Klare Eingaben reduzieren Vermutungen und beschleunigen eine nützliche Antwort. ⌄
- • Teilen Sie die Referenz-MPN, das Gegenstück oder die Quellmarke mit, wenn es für die Prüfung relevant ist.
- • Fügen Sie BOM, Mengenaufteilung und Jahresbedarf hinzu, wenn das Projekt über den Prototypenumfang hinausgeht.
- • Legen Sie Zeichnung, Datenblatt oder kritische Anforderungen zu Impedanz, Frequenz, Montage und Beschichtung bei.
Bild
Zum Vergrößern klicken.
Specifications
| Gehäuseoberfläche | Nickel |
|---|---|
| Gehäusematerial | Zinkdruckguss |
| Kabel Typ (Terminates zu) | Nicht zutreffend |
| Kontaktoberfläche | Gold |
| Kontaktmaterial | Phosphorbronze |
| Kontaktanschluss | Lötbar |
| Kupplungsmechanismus | Bayonet |
| Exportkontroll-Klassifizierungsnummer | EAR99 |
| Frequenz (max) | 1 |
| Geschlecht | Buchse |
| IP-Schutzart | Not Rated |
| Impedanz | 75 |
Show 12 more specs
| Isolator-Material | Polypropylene |
|---|---|
| Isoliert | ja |
| Niedriger PIM | Nein |
| MIL-qualifiziert | Not Mil Qualified |
| Nicht magnetisch | Nein |
| Ausrichtung | Abgewinkelt |
| Montage | Bulkhead - Rear Montage |
| Anzahl Ports | 1 (Single Port) |
| Größe Category | Miniature |
| Temp. (max °C) | 85 |
| Temp. (min °C) | -40 |
| Anschlussart | PCB - Durchsteckmontage |
Beschreibung
Aktuelle Referenzdaten für 031-71046: 75 · 1 · Bulkhead - Rear Montage. Die Impedanz ist als 75 angegeben. Wenn dieser Parameter kritisch ist, bestätigen Sie ihn im RFQ erneut. Die Frequenz ist als 1 angegeben. Die reale Betriebsgrenze hängt weiterhin von Baugruppe, Gegenstück und Einsatzumfeld ab. Die Montage ist als Bulkhead - Rear Montage angegeben. Wenn Panel-, Durchführungs- oder Flanschvorgaben wichtig sind, senden Sie die Maße mit dem RFQ. Das Material ist als Zinkdruckguss angegeben. Das hilft bei der Prüfung, ersetzt aber nicht die Bestätigung der vollständigen Projektkonstruktion. Der Katalog nennt außerdem einen Dichtungs- oder Schutzwert von Not Rated. Prüfen Sie diesen gegen die reale Umgebung im RFQ. Nutzen Sie diese Seite zur Vorauswahl vor dem RFQ, nicht als endgültige Freigabe.
Nutzen Sie diese Seite für die Vorauswahl vor der RFQ. Lieferweg und MOQ 200+ Sonderfertigung werden nach Prüfung von Zeichnung/Spezifikation/BOM bestätigt.
Ähnliche Steckverbinder
Diese Modelle könnten ebenfalls interessant sein:
UBJ220-009
RF-Steckverbinder / Koaxial-Steckverbinder BNC Blkhd Kabel Buchse 75 Ω Rear Mt
R142086161
BNC / gerade Stecker crimp Typ Kabel 7/75 S
CC174-5HR
These versatile 50 Ohm BNC plug coaxial cable assemblies feature fully molded strain reliefs and nickel plated bodies for a cable assembly that can withstand harsh conditions. Gold plated center contacts help minimize attenuation and provide corrosion resistance. The box design 90 degree connector provides an angled connection for tight fit applications. These cable assemblies are stocked in 9 standard lengths from 1 to 10 feet to satisfy your immediate needs.
LCCA30301-FT2
L-com's LCCA30301-FT2 is a low loss BNC male to N female cable assembly using LMR-400 coax, 2 FT with Times Microwave components and ships same-day. The LMR-400 coax of this BNC cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com BNC to N cable assembly has a male to female gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this BNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this BNC male to BNC female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30301-FT2 L-com Low Loss BNC Male to N Female Cable Assembly using LMR-400 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30284-FT6
L-com low loss BNC male to TNC male right angle cable assembly using LMR-240-DB coax, 6 FT with Times Microwave components is available for same day shipping from our facility. This high quality BNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30284-FT6 BNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with BNC connection on one end and right angle TNC connection on the other. This low loss BNC to right angle TNC cable from L-com has a male to male gender combination. Our BNC male to TNC male coaxial assembly part number LCCA30284-FT6 can also be known as low loss BNC plug to right angle TNC plug cable assembly when using alternate gender names. BNC plug to TNC plug cable assembly LCCA30284-FT6 is manufactured with a flexible coax. These flexible BNC to TNC cable assemblies use LMR-240-DB coax and are double shielded. L-com double shielded low loss BNC male to TNC male right angle cable assembly using LMR-240-DB coax, 6 FT with Times Microwave components is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these BNC to TNC M/M cables is 5.8 GHz. Technical performance specifications on these 5.8 GHz BNC male to TNC right angle male cables are located on the LCCA30284-FT6 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss right angle TNC male to BNC male cable assembly because it can be used in the opposite direction.Low loss BNC male to TNC male right angle cable assembly using LMR-240-DB coax, 6 FT with Times Microwave components is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our BNC to right angle TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss BNC male to TNC male right angle cable assembly using LMR-240-DB coax, 6 FT with Times Microwave components.
112160RP
RP-BNC gerade crimp Buchse RG-174 RG-188 RG-316 Times LMR-100A 50 Ω
MPN-Suche Unterstützt exakte, Präfix- und Teiltreffer. ⌄
Haftungsausschluss
Herstellernamen, Marken, Symbole und Teilenummern werden ausschließlich zur Identifikation und zum Querverweis verwendet. Cstone Technology ist ein in China ansässiger Export-Beschaffungspartner für kompatible Alternativen und steht in keiner Verbindung zu den Originalmarken. Marken verbleiben im Eigentum der jeweiligen Inhaber. Die endgültige Eignung wird durch Prüfung der Zeichnung/Spezifikation im Rahmen der RFQ bestätigt.