Detaily produktu
SMA Female Bulkhead to TNC Male Low Loss Cable Using LMR-195 Coax
Číslo dílu (MPN)
Impedance
50 Ohm
Rozhraní
SMA
zakázková RF kabelová sestava z výkresu pro produkční sourcing
zakázková RF kabelová sestava z výkresu orientované na produkci s kontrolou kompatibility, MOQ vodítkem a podporou cost-down sourcingu.
Co připravit před RFQ Jasné vstupy omezují dohady a urychlují odpověď. ⌄
- • Sdělte referenční MPN, protikus nebo zdrojovou značku, pokud je to pro kontrolu důležité.
- • Přidejte BOM, rozdělení množství a roční poptávku, pokud projekt přesahuje prototypový objem.
- • Přiložte výkres, datový list nebo kritické požadavky na impedanci, frekvenci, montáž a povrchovou úpravu.
Obrázek
Kliknutím zvětšíte.
Specifications
| Rozhraní | Cable Assemblies |
|---|---|
| Rozhraní | LMR-195 |
| Rozhraní | SMA |
| Rozhraní | TNC |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Pohlaví | Female |
| Pohlaví | Male |
| Orientace | Straight |
| Orientace | Straight |
| Connector 1 Body Material | Brass |
Show 6 more specs
| Connector 1 Body Plating | Nickel |
|---|---|
| Connector 1 Polarity | Standard |
| Montáž | Bulkhead |
| Connector 2 Polarity | Standard |
| Typ kabelu | LMR-195 |
| Category | Cable Assemblies |
Popis
Aktuální referenční data pro PE3W10825: SMA · 50 Ohm · Bulkhead. Katalog uvádí konfiguraci jako: Straight. Impedance je uvedena jako 50 Ohm. Pokud je tento parametr kritický, potvrďte jej znovu v RFQ. Montáž je uvedena jako Bulkhead. Pokud jsou důležitá omezení panelu, průchodky nebo příruby, pošlete rozměry s RFQ. Materiál je uveden jako Brass. Pomáhá při kontrole, ale nenahrazuje potvrzení celé konstrukce projektu. Tuto stránku použijte pro předvýběr před RFQ, ne jako konečné schválení.
Tuto stránku použijte pro výběr před RFQ. Dodavatelská cesta a zakázková výroba MOQ 200+ se potvrzují po kontrole výkresu/specifikace/BOM.
Podobné konektory
Mohly by vás zajímat také tyto modely:
A30T95-316-
SMA zástrčka do TNC obrácený polarita zásuvka bulkhead using RG316
1250-1020-00
RF konektory / Koaxiální konektory SCD 1250 1020 00 SMA
FMCA1555LF
SMA Female to SMA Female Cable RG405 Coax with LF Solder
LCCA30161-FT5
L-com low loss SMA male to SMA male cable assembly using LMR-195-FR coax, 5 FT with Times Microwave components is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30161-FT5 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and SMA connection on the other. This low loss SMA to SMA cable from L-com has a male to male gender combination. Our SMA male to SMA male coaxial assembly part number LCCA30161-FT5 can also be known as low loss SMA plug to SMA plug cable assembly when using alternate gender names. SMA plug to SMA plug cable assembly LCCA30161-FT5 is manufactured with a flexible coax. These flexible SMA to SMA cable assemblies use LMR-195-FR coax and are double shielded. L-com double shielded low loss SMA male to SMA male cable assembly using LMR-195-FR coax, 5 FT with Times Microwave components is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to SMA M/M cables is 5.8 GHz. Technical performance specifications on these 5.8 GHz SMA male to SMA male cables are located on the LCCA30161-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day.Low loss SMA male to SMA male cable assembly using LMR-195-FR coax, 5 FT with Times Microwave components is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to SMA male cable assembly using LMR-195-FR coax, 5 FT with Times Microwave components.
LCCA30611-FT10
L-com N female to SMA male right angle cable assembly using LC085TBJ coax, 10 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30611-FT10 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N connection on one end and right angle SMA connection on the other. This N to right angle SMA cable from L-com has a female to male gender combination. Our N female to SMA male coaxial assembly part number LCCA30611-FT10 can also be known as N jack to right angle SMA plug cable assembly when using alternate gender names. N jack to SMA plug cable assembly LCCA30611-FT10 is manufactured with a formable coax. These formable N to SMA cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded N female to SMA male right angle cable assembly using LC085TBJ coax, 10 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to SMA F/M cables is 10 GHz. Technical performance specifications on these 10 GHz N female to SMA right angle male cables are located on the LCCA30611-FT10 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle SMA male to N female cable assembly because it can be used in the opposite direction.N female to SMA male right angle cable assembly using LC085TBJ coax, 10 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to right angle SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N female to SMA male right angle cable assembly using LC085TBJ coax, 10 FT.
5180-2240-00
RF adaptéry - mezi řadami SMA zásuvka SMB zásuvka
Vyhledávání MPN Podporuje přesnou, prefixovou i částečnou shodu. ⌄
Vyloučení odpovědnosti
Cstone je profesionální továrna, nikoli obchodní společnost, na RF a koaxiální konektory, adaptéry a kabelové sestavy včetně N-type, BNC, SMA, SMP, SSMB a MMCX. Konektory vyrábíme podle 2D výkresů nebo vzorků; vhodnost, MOQ, dodací lhůtu a výrobní detaily potvrzujeme přes RFQ. Cstone Technology není spojena s původními značkami. Názvy výrobců, ochranné známky, symboly a čísla dílů jsou používány pouze pro identifikaci a křížové odkazy. Ochranné známky zůstávají majetkem příslušných vlastníků. Konečná vhodnost je potvrzena kontrolou výkresu/specifikace během RFQ.