Detaily produktu
SMA Male to SMA Male Cable Using RG303 Coax
Číslo dílu (MPN)
Impedance
50 Ohm
Rozhraní
SMA
zakázková RF kabelová sestava z výkresu pro produkční sourcing
zakázková RF kabelová sestava z výkresu orientované na produkci s kontrolou kompatibility, MOQ vodítkem a podporou cost-down sourcingu.
Co připravit před RFQ Jasné vstupy omezují dohady a urychlují odpověď. ⌄
- • Sdělte referenční MPN, protikus nebo zdrojovou značku, pokud je to pro kontrolu důležité.
- • Přidejte BOM, rozdělení množství a roční poptávku, pokud projekt přesahuje prototypový objem.
- • Přiložte výkres, datový list nebo kritické požadavky na impedanci, frekvenci, montáž a povrchovou úpravu.
Obrázek
Kliknutím zvětšíte.
Specifications
| Rozhraní | Cable Assemblies |
|---|---|
| Rozhraní | RG303 |
| Rozhraní | SMA |
| Rozhraní | SMA |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Impedance | 50 Ohm |
| Pohlaví | Male |
| Pohlaví | Male |
| Orientace | Straight |
| Orientace | Straight |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Nickel |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Typ kabelu | RG303/U |
| Category | Cable Assemblies |
Popis
Aktuální referenční data pro PE35907: SMA · 50 Ohm · Straight. Katalog uvádí konfiguraci jako: Straight. Impedance je uvedena jako 50 Ohm. Pokud je tento parametr kritický, potvrďte jej znovu v RFQ. Pokud zde montáž chybí, potvrďte ji z výkresu nebo požadavku na protikus. Materiál je uveden jako Brass. Pomáhá při kontrole, ale nenahrazuje potvrzení celé konstrukce projektu. Tuto stránku použijte pro předvýběr před RFQ, ne jako konečné schválení.
Tuto stránku použijte pro výběr před RFQ. Dodavatelská cesta a zakázková výroba MOQ 200+ se potvrzují po kontrole výkresu/specifikace/BOM.
Podobné konektory
Mohly by vás zajímat také tyto modely:
CCSMA-MM-SS402-120
RF kabel sestavy Low Loss <.7dB / ft SMA / SMA S / S MM 120in
PE3W02994
SMA Male Right Angle to SMA Female Cable Using PE-SR405FLJ Coax
LCCA30070-FT1.5
L-com SMA male to BNC male cable assembly using RG178 coax, 1.5 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30070-FT1.5 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with SMA connection on one end and BNC connection on the other. This SMA to BNC cable from L-com has a male to male gender combination. Our SMA male to BNC male coaxial assembly part number LCCA30070-FT1.5 can also be known as SMA plug to BNC plug cable assembly when using alternate gender names. SMA plug to BNC plug cable assembly LCCA30070-FT1.5 is manufactured with a flexible coax. These flexible SMA to BNC cable assemblies use RG178 coax and are single shielded. L-com single shielded SMA male to BNC male cable assembly using RG178 coax, 1.5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to BNC M/M cables is 1 GHz. Technical performance specifications on these 1 GHz SMA male to BNC male cables are located on the LCCA30070-FT1.5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a BNC male to SMA male cable assembly because it can be used in the opposite direction.SMA male to BNC male cable assembly using RG178 coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to BNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA male to BNC male cable assembly using RG178 coax, 1.5 FT.
LCCA30542-FT3
L-com precision SMA male to N female bulkhead cable assembly using LC085TB coax, 3 FT , LF solder is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30542-FT3 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF precision coaxial cable assemblies are built with SMA connection on one end and N bulkhead connection on the other. This precision SMA to N cable from L-com has a male to female gender combination. Our SMA male to N female coaxial assembly part number LCCA30542-FT3 can also be known as precision SMA plug to N jack cable assembly when using alternate gender names. SMA plug to N jack cable assembly LCCA30542-FT3 is manufactured with a formable coax. These formable SMA to N cable assemblies use LC085TB coax and are single shielded. L-com single shielded precision SMA male to N female bulkhead cable assembly using LC085TB coax, 3 FT , LF solder is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to N M/F cables is 10 GHz. Technical performance specifications on these 10 GHz SMA male to N female bulkhead cables are located on the LCCA30542-FT3 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a precision N female bulkhead to SMA male cable assembly because it can be used in the opposite direction.Precision SMA male to N female bulkhead cable assembly using LC085TB coax, 3 FT , LF solder is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our precision SMA male to N female bulkhead cable assembly using LC085TB coax, 3 FT , LF solder.
A30B95-L240-
SMA zástrčka do BNC obrácený polarita zásuvka bulkhead using JBY240
RFSMAA4JAADQ
Our SMA connector range are semi-precision and offer a 50 ohms impedance and a 0.25 - 36 threaded coupling. Offering high performance all within a compact SMA (Sub Miniature version A) connector design, frequently used as standard for antennas, devices and various medical applications.
Vyhledávání MPN Podporuje přesnou, prefixovou i částečnou shodu. ⌄
Vyloučení odpovědnosti
Názvy výrobců, ochranné známky, symboly a čísla dílů jsou používány pouze pro identifikaci a křížové odkazy. Cstone Technology je čínský exportní partner pro kompatibilní alternativy a není propojena s původními značkami. Ochranné známky zůstávají majetkem příslušných vlastníků. Konečná vhodnost je potvrzena kontrolou výkresu/specifikace během RFQ.